BlueSafe
← Back to Regulatory Briefings
Regulatory Briefing

1 December WEL readiness: Commonwealth and ACT workplaces

✍️ BlueSafe Technical Team📅 20 Nov 2026

Comcare and WorkSafe ACT have issued November reminders about the change from workplace exposure standards (WES) to workplace exposure limits (WEL) on 1 December 2026. These are implementation reminders, not new duties created on the day the news was published. As at 20 November, businesses should be closing their readiness actions.

Commonwealth: check the applicable list and the benzene timetable

Comcare's 18 November notice confirms the 1 December transition and the duty to prevent exposure above the relevant WEL. It separately states that the reduced benzene WEL takes effect on 1 June 2027. Do not substitute that later date for the wider transition or stop existing benzene controls in the meantime.

Confirm which WHS jurisdiction covers the business and work. A contract with a Commonwealth customer is not, by itself, a reason to replace the workplace's applicable state or territory requirements with Commonwealth requirements.

ACT: turn the reminder into assigned readiness actions

WorkSafe ACT's 17 November alert asks PCBUs to review exposures and controls, monitoring, risk assessments, safety data sheets and safe work procedures, and to consult affected workers and HSRs. It covers dust, fumes, gases and vapours, including substances with revised limits and additional entries.

Build an action list around actual tasks rather than changing a heading from WES to WEL:

  • Identify contaminants generated during normal work, maintenance, cleaning and foreseeable non-routine work.
  • Record the applicable jurisdiction, substance, limit type, units and commencement date. Resolve uncertain applicability before inserting a number into a procedure.
  • Check extraction, isolation, substitution and other controls under the conditions in which people actually work.
  • Review the basis for air monitoring and health monitoring; seek occupational-hygiene advice where needed.
  • Obtain current supplier SDSs and check the information against the applicable requirements. Do not simply edit a supplier's SDS to match a summary article.
  • Assign owners and due dates for document revisions, worker consultation, instruction, control checks and any outstanding corrective work.

Keep current controls in place while preparing for the change. A new document version is only one part of readiness; supervisors also need evidence that the controls work.

Updated model Codes support the review, but adoption still matters

Safe Work Australia announced updates to 15 model Codes on 12 November, covering WEL terminology and links to air-monitoring guidance. The affected topics include hazardous chemicals, welding, silica, asbestos, confined spaces, demolition and excavation.

An updated model Code is not automatically a newly approved Code in every jurisdiction. Check the locally applicable Code and law before replacing a jurisdiction-specific reference. Victoria uses its separate OHS framework. Do not extrapolate Comcare's notice into a uniform national timetable: the SA, Tasmania and WA briefing explains important state differences.

Keep the evidence together

The useful handover is a contaminant-and-task register connected to current risk assessments, controls, monitoring decisions, consultation and verified actions. That lets a supervisor explain what changes on 1 December and what remains subject to a different timetable.

Blue Safe provides compliant WHS documents tailored to your activities and applicable jurisdiction. We can review and upgrade eligible existing documents so you can retain your previous investment, then use the documents and Blue Safe's practical workflows to implement controls and keep evidence organised. Contact Blue Safe to arrange a document review.

Still have questions?

Our team of WHS experts is here to help.