Tyre Changing - Tractor and Off-Road SWMS
This Tyre Changing - Tractor and Off-Road SWMS covers servicing and changing tyre assemblies on tractor and off-road plant.
Activities covered include
- Plan tyre servicing and establish the work area
- Dismount tyre components
- Test and inspect plant, then clean up and sign off
Download immediately
Your editable Word and PDF files are ready to download after purchase.
Acceptance guaranteed
If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.
- 100% Compliant with Australian WHS Acts & Regulations
- Fully Editable MS Word & PDF Formats Included
- Pre-filled Content - Ready to Deploy Immediately
- Customisable - Easily Add Your Logo & Site Details
- Includes 2 Years of Free Compliance Updates
Product Overview
This Tyre Changing - Tractor and Off-Road SWMS covers servicing and changing tyre assemblies on tractor and off-road plant. It supports planning and risk management for uneven ground, plant stability, stored pressure, rim components and wheel refitting.
Activities & Specific Tasks Covered
This document includes task-specific risk controls for:
- Plan tyre servicing and establish the work area
- Inspect tyre and rim condition
- Immobilise, lift and support plant safely
- Deflate the tyre assembly
- Remove the wheel assembly
- Dismount tyre components
- Prepare replacement tyre and rim components
- Mount the tyre and rim
- Inflate the tyre safely
- Refit the wheel assembly
- Test and inspect plant, then clean up and sign off
Who is this for?
Suitable for contractors, workers, supervisors and businesses carrying out tractor and off-road tyre-changing work.
Specific Job Steps & Hazards Covered
| Job Step / Activity | Potential Hazards |
|---|---|
| Plan tyre servicing |
|
| Establish work area |
|
| Inspect tyre and rim |
|
| Immobilise plant safely |
|
| Lift and support plant |
|
| Deflate tyre assembly |
|
| Remove wheel assembly |
|
| Dismount tyre components |
|
| Prepare replacement components |
|
| Mount tyre and rim |
|
| Inflate tyre safely |
|
| Refit wheel assembly |
|
| Test and inspect plant |
|
| Clean up and sign off |
|
Need to add specific site requirements?
Use the BlueSafe Portal to tailor this SWMS with site-specific details, job steps, hazards, controls and responsibilities before work starts.
Acceptance Guaranteed: If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.
Legislation & References
The template includes references relevant to the documented work, including:
- Applicable Commonwealth, state or territory WHS/OHS legislation and regulations.
- Model Code of Practice: How to Manage Work Health and Safety Risks — guidance on identifying hazards, eliminating risks where reasonably practicable, applying the hierarchy of controls and reviewing controls.
- Model Code of Practice: Managing Risks of Plant in the Workplace — guidance for plant inspection, maintenance, isolation, instruction, training and supervision.
- Model Code of Practice: Hazardous Manual Tasks — guidance for controlling high-force lifting, pushing, pulling and awkward postures.
- Model Code of Practice: Managing Noise and Preventing Hearing Loss at Work — guidance for managing compressor, impact-tool and plant noise.
- Model Code of Practice: Managing Risks of Hazardous Chemicals in the Workplace — guidance for tyre lubricants, ballast fluids, fuels and safety data sheets.
- Rural Plant Code of Practice 2024 — guidance recommends qualified tyre professionals; where tyre work is necessary, remove valve cores before removal, stand to the side during inflation, confirm locking-ring seating and use an inflation cage.
- AS 4457 series, Earth-moving machinery — tyres and rims; use applicable tyre/rim selection, maintenance and repair requirements as technical guidance.
- AS/NZS 1337.1, Personal eye protection; AS/NZS 1715 and AS/NZS 1716, respiratory protective equipment; AS/NZS 1801 and AS/NZS 1800, occupational protective helmets; AS/NZS 2161, occupational protective gloves; AS/NZS 2210.3, safety footwear; AS/NZS 4602.1, high-visibility safety garments; AS/NZS 1270, hearing protectors.
Standard SWMS Features (Click to Expand)
- Task-specific job steps, hazards and control measures
- Initial and residual risk ratings
- Assigned responsible persons for each job step
- Plant, equipment and PPE requirements where applicable
- Permits, qualifications and high-risk construction work details where applicable
- Worker consultation, sign-off and review sections
Suitable for Industries
Related templates
$79.50
$96.80
Includes all formats + 2 years updates
Acceptance guaranteed
If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.
$79.50
$96.80
One-time payment