Skylight and Vent Installation SWMS

Product Overview

This SWMS covers the planning, roof access, installation, inspection and close-out activities involved in skylights, skydomes, ridge vents and whirlybirds. It supports management of falls, openings, fragile roofing, lifting, cutting, electrical contact and falling-object hazards.

Activities & Specific Tasks Covered

This document includes task-specific risk controls for:

• Review the work, site conditions and emergency arrangements
• Set up the site, exclusion areas and access controls
• Inspect roofing, roof structure and nearby services
• Position plant and access equipment for roof work
• Install fall protection for edges, openings and fragile areas
• Lift skylights, vents and materials to the roof
• Remove damaged roof sheets and manage debris
• Form openings for skylights while managing services and dust
• Install skylights and skydomes
• Install ridge vents and whirlybirds
• Inspect ducts, vents and roof penetrations
• Seal, test, clean up and complete handover

Who is this for?

Suitable for contractors, workers, supervisors and businesses carrying out skylight, vent or related roof work.

Specific Job Steps & Hazards Covered

Legislation & References

The template includes references relevant to the documented work, including:

• Applicable Commonwealth, state or territory WHS/OHS legislation and regulations.
• Model Code of Practice: Construction Work — SWMS requirements, consultation and workplace-specific controls.
• Model Code of Practice: Managing the Risk of Falls at Workplaces — hierarchy of fall controls, training, rescue and equipment inspection.
• Model Code of Practice: Work on Roofs – Commercial and Industrial Buildings — fragile roofs, skylights, roof openings, roof access and no-go areas.
• Model Code of Practice: Managing the Risk of Falls in Housing Construction — edge protection and protection of skylights and roof openings.
• Model Code of Practice: How to Safely Remove Asbestos — apply if asbestos-containing material is identified or suspected.
• AS/NZS 1891 series Industrial fall-arrest systems and devices.
• AS/NZS 4994 series Temporary edge protection.
• AS/NZS 5532 Manufacturing requirements for single-point anchor device used for harness-based work at heights.
• AS 2550.10 Cranes, hoists and winches — Safe use — Mobile elevating work platforms.
• AS/NZS 4576 Guidelines for scaffolding.
• AS/NZS 3012 Electrical installations — Construction and demolition sites.
• AS/NZS 1337.1 Eye and face protection.
• AS/NZS 1801 Occupational protective helmets.
• AS/NZS 2210.3 Personal protective equipment — Safety footwear.
• AS/NZS 1270 Hearing protectors.
• AS/NZS 4602.1 High visibility safety garments.

---

Standard SWMS Features (Click to Expand)

• Task-specific job steps, hazards and control measures
• Initial and residual risk ratings
• Assigned responsible persons for each job step
• Plant, equipment and PPE requirements where applicable
• Permits, qualifications and high-risk construction work details where applicable
• Worker consultation, sign-off and review sections