Name: Screener Crusher SWMS
Brand: BlueSafe Online
SKU: prod_01KBPM0Q0D9C10R5GSKVNWQKS2
Price: 79.50 AUD
Availability: InStock

Product Overview

This SWMS covers screener-crusher work from planning and plant set-up through operation, maintenance and demobilisation. It supports planning and risk management for mobile plant, moving components, material ejection, dust, fuel and stored energy hazards.

Activities & Specific Tasks Covered

This document includes task-specific risk controls for:

Complete pre-start planning and briefing
Establish work-zone and traffic controls
Deliver, position and inspect the plant
Set up screens and conveyors
Inspect and prepare feedstock
Start the screener crusher and feed material
Monitor operating plant and material flow
Clear blockages and material build-up
Refuel the plant and manage spills
Maintain components, shut down and demobilise

Who is this for?

For contractors, workers, supervisors and businesses carrying out screener-crusher work.

Specific Job Steps & Hazards Covered

Job Step / Activity	Potential Hazards
Pre-start planning and briefing	Unplanned work changes Inexperienced operators Poor communication Fatigue and heat stress
Establish work zone and traffic controls	Plant-person interaction Vehicle collision Unauthorised entry Flying rock and ejected material Dust migration
Deliver and position plant	Crush from plant unloading Plant roll-over Trailer movement Overhead service strike Soft-ground failure
Complete plant pre-start inspection	Guard failure Hydraulic injection Fire from fluid leak Unexpected plant movement Failed emergency stop
Set up screens and conveyors	Crush points Fall from access platform Stored hydraulic energy Falling screen media Manual handling strain
Inspect and prepare feedstock	Explosive or hazardous material Asbestos-containing material Metal ejection Oversized feed Dust exposure
Start screener crusher safely	Unexpected start-up Entanglement in conveyors Noise exposure Dust release Plant fire
Feed and screen material	Loader collision Hopper engulfment Rock ejection Plant overload Conveyor entanglement Silica dust Noise exposure
Monitor operating plant	Belt tracking failure Material spillage Hydraulic failure Fire Unplanned access to danger zones
Clear blockages and build-up	Crushing and entanglement Stored energy release Falling material Unexpected restart Falls from plant Hydraulic injection
Refuel and manage spills	Fuel fire Fuel spill Static ignition Slip hazard Environmental contamination
Maintain and change components	Stored energy Dropped components Sharp screen media Electrical shock Manual handling injury Unauthorised restart
Shut down and demobilise	Unexpected movement Residual material fall Plant transport incident Slips and trips Unauthorised use

Need to add specific site requirements?

Use the BlueSafe Portal to tailor this SWMS with site-specific details, job steps, hazards, controls and responsibilities before work starts.

Acceptance Guaranteed: If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.

Legislation & References

The template includes references relevant to the documented work, including:

Applicable Commonwealth, state or territory WHS/OHS legislation and regulations, including duties to manage risks, provide safe plant, consult workers, control plant risks, manage airborne contaminants, noise, hazardous chemicals and construction-work risks where applicable.
Model Code of Practice: Managing the Risks of Plant in the Workplace (guidance only unless adopted or approved in the relevant jurisdiction). It supports fixed or interlocked guarding, prevention of guard bypassing, maintenance of guards and prevention of restart while guards are removed.
Model Code of Practice: How to Manage Work Health and Safety Risks (guidance only unless adopted or approved in the relevant jurisdiction).
Model Code of Practice: Work Health and Safety Consultation, Cooperation and Coordination (guidance only unless adopted or approved in the relevant jurisdiction). Consultation with workers and coordination between duty holders are required so far as is reasonably practicable under corresponding WHS duties.
Model Code of Practice: Managing Noise and Preventing Hearing Loss at Work; Model Code of Practice: Managing Risks of Hazardous Chemicals in the Workplace; Model Code of Practice: Managing the Work Environment and Facilities; and Model Code of Practice: Construction Work, as relevant and only where adopted or approved.
AS 4024.1 Safety of machinery series; AS 1319 Safety signs for the occupational environment; AS/NZS 1715 and AS/NZS 1716 Respiratory protective equipment; AS/NZS 1270 Acoustics—Hearing protectors; AS/NZS 1337.1 Personal eye-protection; AS/NZS 2210.3 Safety footwear; AS/NZS 4602.1 High-visibility safety garments; and manufacturer instructions.

Standard SWMS Features (Click to Expand)

Task-specific job steps, hazards and control measures
Initial and residual risk ratings
Assigned responsible persons for each job step
Plant, equipment and PPE requirements where applicable
Permits, qualifications and high-risk construction work details where applicable
Worker consultation, sign-off and review sections

Screener Crusher SWMS

Activities covered include

Download immediately

Acceptance guaranteed