BlueSafe

Quarry Excavation Risk Assessment

This risk assessment covers quarry excavation work, including ground assessment, services, plant operation, excavation faces, access and emergency response.

Activities covered include

  • Assess ground conditions, voids, stockpiles and site access before work
  • Provide safe worker access and egress near open excavations
  • Prepare for collapse, service-strike and medical emergencies

Download immediately

Your editable Word and PDF files are ready to download after purchase.

Acceptance guaranteed

If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.

Quarry Excavation Risk Assessment
  • 100% Compliant with Australian WHS Acts & Regulations
  • Fully Editable MS Word & PDF Formats Included
  • Pre-filled Content - Ready to Deploy Immediately
  • Customisable - Easily Add Your Logo & Site Details
  • Includes 2 Years of Free Compliance Updates

Product Overview

This risk assessment covers quarry excavation work, including ground assessment, services, plant operation, excavation faces, access and emergency response. It supports planning and risk management by identifying changing ground, weather, traffic and exposure conditions around excavations.

Activities & Risks Covered

This assessment addresses activities and risks including:

  • Assess ground conditions, voids, stockpiles and site access before work
  • Locate underground and overhead services
  • Establish access routes, haul roads and traffic controls
  • Operate excavators, loaders, dozers and trucks around excavation areas
  • Manage excavation faces, benches, edges and loose material
  • Provide safe worker access and egress near open excavations
  • Control dust, silica, noise and atmospheric contaminants
  • Manage water ingress, wet ground and changing weather
  • Carry out manual tasks, tool use and maintenance around excavation work
  • Prepare for collapse, service-strike and medical emergencies

Who is this for?

Suitable for workers, supervisors, contractors and businesses carrying out quarry excavation activities.

Activities & Hazards Covered

Activity Potential Hazards
Pre-start planning and ground assessment
  • unexpected ground instability or collapse
  • unidentified previous excavation or voids
  • adjacent structures or stockpiles affecting ground stability
  • unauthorised access to the excavation area
  • weather or groundwater changing conditions during the shift
Locating underground and overhead services
  • contact with underground electricity, gas, water, sewer or communications services
  • striking overhead powerlines with plant or loads
  • electric shock, fire, explosion or service interruption
  • incorrect assumptions about service location or depth
Establishing access, haul roads and traffic interaction
  • collision between mobile plant, light vehicles and pedestrians
  • rollover or loss of control on uneven ground or haul roads
  • reversing incidents in blind spots
  • workers entering plant operating areas
Operating excavators, loaders, dozers and trucks
  • plant rollover or edge collapse
  • collision with workers, other plant or structures
  • bucket, blade or load striking people
  • mechanical failure or loss of braking/steering control
Excavation faces, batters, benches and edge protection
  • collapse of excavation walls or rock faces
  • workers or plant falling into excavation
  • falling rocks, soil or loose material
  • instability caused by plant or spoil placed too close to edges
Worker access, egress and work near open excavations
  • slips, trips and falls entering, leaving or moving near excavations
  • falling into open pits, trenches or edges
  • workers being trapped if access points are blocked
  • falling objects striking workers below
Dust, silica, noise and atmospheric contaminants
  • respirable dust including silica from rock, sandstone, drilling or dry excavation
  • noise-induced hearing damage
  • diesel exhaust, gases or oxygen-deficient atmospheres in low or enclosed excavations
  • reduced visibility from airborne dust
Water ingress, wet ground and changing weather
  • in-rush of water or mud
  • slips, bogging and plant instability
  • collapse from saturated ground
  • reduced visibility and lightning exposure during storms
Manual tasks, tools and maintenance around excavation work
  • musculoskeletal injury from handling hoses, tools, trench sheets or components
  • hand injuries from hand tools and pinch points
  • vibration exposure from hand-held tools
  • injury during plant maintenance or clearing blockages
Emergency response and incident management
  • worker trapped by collapse or plant incident
  • service strike causing fire, explosion or electric shock
  • medical emergency in a remote excavation area
  • delayed rescue due to poor communication or blocked access

Need to tailor this risk assessment?

Use the BlueSafe Portal to add site-specific activities, hazards, controls, responsibilities and review details before the assessment is put into use.

Acceptance Guaranteed: If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.

Legislation & References

The template records model guidance used to inform the documented controls. Applicable WHS/OHS laws and adopted Codes vary by state or territory, so confirm the current local requirements when tailoring the assessment:

  • Model guidance: Model Code of Practice: Excavation work — 2.3. Controlling the risks; p. 17.
  • Model guidance: Model Code of Practice: Managing the work environment and facilities — 2. The work environment; p. 13.
  • Model guidance: Model Code of Practice: First aid in the workplace — 3. First aid equipment, facilities and training; p. 12.
  • Model guidance: Model Code of Practice: Managing risks of plant in the workplace — Assessing plant risks — work practices and procedures; p. 20.
  • Model guidance: Model Code of Practice: Managing the risk of falls at workplaces — 3.2 Identifying the hazards; p. 16.
  • Model guidance: Model Code of Practice: Construction work — 6.2 Workplace specific induction training; p. 41.
  • Model guidance: Model Code of Practice: Work health and safety consultation, cooperation and coordination — 3. What is effective consultation?; p. 13.
  • Model guidance: Model Code of Practice: Hazardous manual tasks — 4.1 The hierarchy of control measures; p. 31.
  • Model guidance: Model Code of Practice: Managing noise and preventing hearing loss at work — 5. Controlling the risks; p. 29.
  • Model guidance: Model Code of Practice: How to manage work health and safety risks — 4. Step 3 — How to control risks; p. 20.
  • Model guidance: Model Code of Practice: Managing electrical risks in the workplace — 2.1 Identifying the hazards; p. 14.

Standard Risk Assessment Features (Click to Expand)
  • Activity-specific hazard identification and control measures
  • Initial and residual risk ratings
  • Assigned responsible persons for each activity
  • Risk matrix and assessment classification
  • Review, monitoring and sign-off fields
  • Site-specific customisation before use

Suitable for Industries

Civil Construction and EarthworksMining and Resources

Related templates

$79.50

One-time payment