Builders Clean and Construction Cleaning SWMS

Product Overview

This SWMS covers builders clean and construction cleaning activities, including work-zone setup, waste removal, cleaning and final handover. It supports planning, hazard identification and risk management for contamination, equipment, access and cleaning tasks.

Activities & Specific Tasks Covered

This document includes task-specific risk controls for:

• Plan the work, identify site hazards and confirm emergency arrangements
• Establish cleaning work zones and control access
• Inspect contamination hazards before cleaning
• Inspect cleaning equipment, leads and hoses
• Remove construction waste and sharp debris
• Clean silica-containing dust and manage dust migration
• Use cleaning chemicals and manage spills or vapours
• Clean amenities and portable toilets
• Clean elevated surfaces and internal finishes
• Complete post-event cleanup where required
• Dispose of waste and demobilise the work area
• Undertake final inspection and handover

Who is this for?

Suitable for contractors, workers, supervisors and businesses carrying out builders clean and construction cleaning activities.

Specific Job Steps & Hazards Covered

Legislation & References

The template includes references relevant to the documented work, including:

• Applicable Commonwealth, state or territory WHS/OHS legislation and regulations.
• Model Code of Practice: How to manage work health and safety risks (Safe Work Australia, 2024) — guidance for consultation, hazard identification, control selection and review.
• Model Code of Practice: Construction work — guidance for SWMS arrangements, site access, barricaded areas, housekeeping and worker conduct.
• Model Code of Practice: Managing the risks of hazardous chemicals in the workplace — guidance for SDS, labelling, chemical compatibility, storage and exposure control.
• Model Code of Practice: Managing respirable crystalline silica dust exposure in construction and manufacturing of construction elements — guidance for HEPA vacuuming, wet methods, slurry disposal, hygiene and prohibition on compressed-air cleaning.
• Model Code of Practice: How to manage and control asbestos in the workplace and How to safely remove asbestos — guidance where asbestos-containing material is suspected or identified.
• Model Code of Practice: Managing the work environment and facilities — guidance for accessible toilets, drinking water, washing and eating facilities.
• Model Code of Practice: Managing the risk of falls at workplaces — guidance for cleaning at height and selection of higher-order fall controls.
• Model Code of Practice: Hazardous manual tasks — guidance for lifting, pushing, pulling and repetitive cleaning tasks.
• Model Code of Practice: Managing noise and preventing hearing loss at work — guidance for pressure cleaners, vacuums, scrubbers and plant.
• Model Code of Practice: Traffic management for construction or maintenance work — guidance for cleaning around moving vehicles and mobile plant.
• AS/NZS 1715 and AS/NZS 1716 respiratory protective equipment; AS/NZS 1891 industrial fall-arrest systems; AS/NZS 4576 scaffolding guidelines; AS 1892 portable ladders; AS/NZS 3760 in-service safety inspection and testing of electrical equipment; AS/NZS 3012 electrical installations—construction and demolition sites; AS/NZS 2210.3 safety footwear; AS/NZS 1337.1 eye protection; AS/NZS 2161 protective gloves.

---

Standard SWMS Features (Click to Expand)

• Task-specific job steps, hazards and control measures
• Initial and residual risk ratings
• Assigned responsible persons for each job step
• Plant, equipment and PPE requirements where applicable
• Permits, qualifications and high-risk construction work details where applicable
• Worker consultation, sign-off and review sections