Name: Work At Night Or Poor Lighting SWMS
Brand: BlueSafe Online
SKU: prod_01M283J8EJY67W7JBWCMDBAC1C
Price: 79.50 AUD
Availability: InStock

Product Overview

This SWMS covers planning and performing work at night or in poor lighting, including lighting, access, temporary power and close-out. It supports identifying hazards and managing risks related to visibility, fatigue, weather, vehicles and lighting failures.

Activities & Specific Tasks Covered

This document includes task-specific risk controls for:

Plan night work and identify site hazards
Inspect access routes and work areas
Set up lighting and connect temporary power
Establish exclusion zones around work activities
Conduct pre-start briefings and communicate arrangements
Perform work while managing visibility and moving plant
Schedule and manage fatigue breaks
Monitor weather conditions and respond to lighting failures
Clean the area, demobilise and sign off

Who is this for?

For contractors, workers, supervisors and businesses undertaking work at night or in poor lighting.

Specific Job Steps & Hazards Covered

Job Step / Activity	Potential Hazards
Plan night work	Inadequate work planning Unidentified site hazards Fatigue-related error Lone-worker exposure
Inspect site access	Slips and trips Falls on uneven ground Vehicle strike Unauthorised entry
Set up lighting	Poor visibility Glare and shadowing Lighting tower instability Falling equipment
Connect temporary power	Electric shock Electrical fire Damaged leads Generator fumes
Establish exclusion zones	Plant-person interaction Reversing vehicle strike Public intrusion Conflicting work activities
Conduct pre-start briefing	Unclear instructions Communication failure Fatigue impairment Inadequate emergency response
Perform night work	Slips and trips Incorrect task execution Contact with moving plant Eye strain from glare
Manage fatigue breaks	Reduced alertness Microsleeps Poor decision-making Vehicle crash after shift
Monitor weather conditions	Reduced visibility from rain Wind-blown equipment Wet slippery surfaces Lightning exposure
Respond to lighting failure	Sudden darkness Panic and disorientation Vehicle collision Delayed emergency response
Clean work area	Trips during clean-up Manual handling strain Contact with energised equipment Discarded sharp materials
Demobilise and sign off	Struck by departing vehicles Unauthorised access after departure Unreported defects Fatigued driving

Need to add specific site requirements?

Use the BlueSafe Portal to tailor this SWMS with site-specific details, job steps, hazards, controls and responsibilities before work starts.

Acceptance Guaranteed: If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.

Legislation & References

The template includes references relevant to the documented work, including:

Applicable Commonwealth, state or territory WHS/OHS legislation and regulations, including duties to eliminate or minimise risks so far as is reasonably practicable, provide safe workplace facilities and lighting, maintain control measures, manage fatigue, and provide suitable information, training, instruction and supervision.
Model Code of Practice: Managing the Work Environment and Facilities — practical guidance for workplace lighting, access, remote or isolated work and emergency arrangements; model codes require adoption in the relevant jurisdiction before having legal effect.
Model Code of Practice: Managing the Risk of Fatigue at Work — plan resources and monitor actual hours where safety-critical work is performed at night.
Model Code of Practice: Managing the Risks of Plant in the Workplace — guidance on authorised operators, traffic rules, no-go areas, training and supervision.
Model Code of Practice: Managing the Risk of Falls at Workplaces — guidance where poor lighting affects access, fall prevention or fall-arrest arrangements.
AS/NZS 1680 series Interior and workplace lighting; AS/NZS 3012 Electrical installations—Construction and demolition sites; AS/NZS 3000 Electrical installations; AS/NZS 2293.1 Emergency lighting and exit signs for buildings; AS/NZS 4602.1 High visibility safety garments; AS/NZS 4836 Safe working on or near low-voltage electrical installations and equipment, as applicable.

Standard SWMS Features (Click to Expand)

Task-specific job steps, hazards and control measures
Initial and residual risk ratings
Assigned responsible persons for each job step
Plant, equipment and PPE requirements where applicable
Permits, qualifications and high-risk construction work details where applicable
Worker consultation, sign-off and review sections

Work At Night Or Poor Lighting SWMS

Included with your purchase