Wood Joinery Techniques and Timber Jointing SWMS

Product Overview

This SWMS covers planning and carrying out timber jointing work, from material selection and marking out through cutting, assembly, glue-up and inspection. It supports work planning and risk management for moving machinery, cutting tools, dust, noise, adhesives, clamps and timber handling.

Activities & Specific Tasks Covered

This document includes task-specific risk controls for:

• Plan the task sequence, joint selection and work coordination
• Set up the work area and control access, lighting, dust and trip hazards
• Inspect and isolate plant before use
• Select, handle and position timber materials
• Mark out work and secure materials with clamps
• Carry out machine cutting and profiling of timber
• Prepare biscuit, dowel, mortise and tenon joints
• Complete hand-cut joinery and pocket-screw assembly
• Glue, press and handle assembled timber components
• Manage wood dust, airborne particles and noise
• Clean up off-cuts and waste, then complete final inspection and sign-off

Who is this for?

Suitable for contractors, workers, supervisors and businesses carrying out wood joinery and timber jointing activities.

Specific Job Steps & Hazards Covered

Legislation & References

The template includes references relevant to the documented work, including:

• WHS Act 2011 sections 19, 46-49 - primary duty of care, consultation and worker participation.
• WHS Regulation Chapter 3 Part 3.1 - manage risks to health and safety; maintain and review control measures.
• WHS Regulation section 43 - emergency plans.
• WHS Regulation sections 47-49 and 50 - airborne contaminants, exposure standards and air monitoring.
• WHS Regulation Chapter 4 Part 4.1 - noise; section 56 exposure standard and audiometric testing requirements where hearing protection is frequently required.
• WHS Regulation Chapter 4 Part 4.2 - hazardous manual tasks.
• WHS Regulation Chapter 5 - plant and structures, including guarding, inspection, maintenance and safe operation of plant.
• WHS Regulation sections 328-388 and section 346 - hazardous chemicals, SDS, labelling, storage and hazardous chemicals register.
• Code of Practice: Sawmilling industry - practical guidance on guarding, kickback control, wood dust extraction, housekeeping, hazardous manual tasks and noise control relevant to timber machining and profiling.
• Code of Practice: Managing risks of hazardous chemicals in the workplace - storage, handling, ignition source control and maintenance of chemical controls.
• Code of Practice: Managing noise and preventing hearing loss at work - engineering and administrative noise controls, review and maintenance.

---

Standard SWMS Features (Click to Expand)

• Task-specific job steps, hazards and control measures
• Initial and residual risk ratings
• Assigned responsible persons for each job step
• Plant, equipment and PPE requirements where applicable
• Permits, qualifications and high-risk construction work details where applicable
• Worker consultation, sign-off and review sections