BlueSafe

Sign Installation Risk Assessment

This risk assessment covers sign installation activities from planning and site assessment through delivery, access, fixing, lifting and site completion.

Activities covered include

  • Plan the installation, assess the site and clarify required permits
  • Work near electrical hazards and existing services
  • Manage weather, housekeeping, reinstatement and completion

Download immediately

Your editable Word and PDF files are ready to download after purchase.

Acceptance guaranteed

If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.

Sign Installation Risk Assessment
  • 100% Compliant with Australian WHS Acts & Regulations
  • Fully Editable MS Word & PDF Formats Included
  • Pre-filled Content - Ready to Deploy Immediately
  • Customisable - Easily Add Your Logo & Site Details
  • Includes 2 Years of Free Compliance Updates

Product Overview

This risk assessment covers sign installation activities from planning and site assessment through delivery, access, fixing, lifting and site completion. It supports planning and risk management by identifying hazards associated with the work area, public interface, services, tools, plant and changing conditions.

Activities & Risks Covered

This assessment addresses activities and risks including:

  • Plan the installation, assess the site and clarify required permits
  • Access the site, deliver and unload signs, posts and tools
  • Manage traffic, pedestrians and public interaction near the work area
  • Use access equipment and work at height
  • Work near electrical hazards and existing services
  • Drill, fix, cut and use hand or power tools
  • Position signs using plant, lifting equipment or elevated work platforms
  • Install posts and undertake ground penetration or excavation
  • Manage weather, housekeeping, reinstatement and completion

Who is this for?

Suitable for contractors, workers, supervisors and businesses carrying out sign installation activities.

Activities & Hazards Covered

Activity Potential Hazards
Planning, site assessment and permits
  • Incorrect site information leading to uncontrolled exposure to traffic, electrical services, fragile surfaces or underground services
  • Unclear responsibilities between contractor, site contact and workers
  • Unauthorised access by workers or the public during sign installation
  • Weather, wind or poor lighting affecting safe setup and installation
Access, delivery and unloading materials
  • Strains and sprains from lifting awkward, bulky or heavy signs, posts and tools
  • Crush injuries from shifting loads or dropped materials
  • Vehicle movement during delivery and unloading
  • Slips, trips and falls around stored materials, packaging and uneven ground
Traffic, pedestrians and public interface
  • Workers struck by passing vehicles, mobile plant or reversing delivery vehicles
  • Pedestrians entering the work area and being struck by tools or materials
  • Driver distraction or sudden vehicle movements near roadside work
  • Poor visibility of the work area
Work at height and access equipment
  • Falls from ladders, platforms, roofs or elevated work platforms
  • Falling tools or sign components striking workers or the public below
  • Unstable or unsuitable access equipment
  • Misuse of plant or makeshift platforms to gain height
Electrical hazards and nearby services
  • Electric shock or arc flash from overhead powerlines, existing wiring or damaged electrical equipment
  • Contact with concealed electrical services while drilling or fixing
  • Use of damaged leads, tools or temporary power in wet conditions
  • Unexpected energisation during connection or testing of illuminated signs
Drilling, fixing, cutting and use of hand or power tools
  • Cuts, punctures and eye injuries from tools, fixings and flying particles
  • Dust exposure from drilling, grinding or cutting masonry, concrete or similar materials
  • Noise exposure from powered tools
  • Kickback, entanglement or loss of control of tools
Plant, lifting equipment and elevated work platforms
  • Collision between plant and workers or structures
  • Crushing or entrapment during positioning of signs or plant
  • Overturning due to poor ground, overreach or unsuitable setup
  • Dropped loads during lifting or positioning
Ground penetration, posts and excavation
  • Contact with underground electrical, gas, water, communications or other services
  • Collapse of small excavations or unstable ground around post holes
  • Trips or falls into open holes
  • Manual handling and struck-by risks while positioning posts and concrete or spoil
Environmental conditions, housekeeping and completion
  • Wind catching sign panels or affecting worker balance at height
  • Heat, sun exposure, rain or slippery surfaces
  • Trips from offcuts, cords, packaging and waste
  • Incomplete reinstatement leaving the area unsafe for workers or the public

Need to tailor this risk assessment?

Use the BlueSafe Portal to add site-specific activities, hazards, controls, responsibilities and review details before the assessment is put into use.

Acceptance Guaranteed: If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.

Legislation & References

The template records model guidance used to inform the documented controls. Applicable WHS/OHS laws and adopted Codes vary by state or territory, so confirm the current local requirements when tailoring the assessment:

  • Model guidance: Model Code of Practice: Managing risks of plant in the workplace — Plant hazard identification — Traffic movements in the workplace; p. 17.
  • Model guidance: Model Code of Practice: Managing electrical risks in the workplace — 2.1 Identifying the hazards; p. 14.
  • Model guidance: Model Code of Practice: Managing the work environment and facilities — 1.2 Managing risks associated with the work environment and facilities; p. 12.
  • Model guidance: Model Code of Practice: Excavation work — 2.3. Controlling the risks; p. 17.
  • Model guidance: Model Code of Practice: Hazardous manual tasks — 4.1 The hierarchy of control measures; p. 31.
  • Model guidance: Model Code of Practice: Construction work — 6.2 Workplace specific induction training; p. 41.
  • Model guidance: Model Code of Practice: Work health and safety consultation, cooperation and coordination — 3. What is effective consultation?; p. 13.
  • Model guidance: Model Code of Practice: Managing noise and preventing hearing loss at work — 5. Controlling the risks; p. 29.
  • Model guidance: Model Code of Practice: How to manage work health and safety risks — 4. Step 3 — How to control risks; p. 20.

Standard Risk Assessment Features (Click to Expand)
  • Activity-specific hazard identification and control measures
  • Initial and residual risk ratings
  • Assigned responsible persons for each activity
  • Risk matrix and assessment classification
  • Review, monitoring and sign-off fields
  • Site-specific customisation before use

Suitable for Industries

Building and ConstructionCivil Construction and Earthworks

Related templates

$79.50

One-time payment