Shower Screen Mirror and Glass Balustrade Installation SWMS
This SWMS covers planning, handling and installing shower screens, mirrors, glass balustrades, glass fence panels and related fittings.
Activities covered include
- Site induction, work-area setup and access control
- Installing glass balustrades and fence panels
- Cleaning up glass waste, materials and the work area
Download immediately
Your editable Word and PDF files are ready to download after purchase.
Acceptance guaranteed
If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.
- 100% Compliant with Australian WHS Acts & Regulations
- Fully Editable MS Word & PDF Formats Included
- Pre-filled Content - Ready to Deploy Immediately
- Customisable - Easily Add Your Logo & Site Details
- Includes 2 Years of Free Compliance Updates
Product Overview
This SWMS covers planning, handling and installing shower screens, mirrors, glass balustrades, glass fence panels and related fittings. It supports the identification and management of risks associated with glass handling, access, drilling, installation, inspection and clean-up.
Activities & Specific Tasks Covered
This document includes task-specific risk controls for:
- Site induction, work-area setup and access control
- Unloading, storing and inspecting glass panels and fittings
- Preparing access, work faces and installation locations
- Marking locations, drilling and installing fixings
- Installing glass balustrades and fence panels
- Installing shower screen panels, mirrors and whiteboards
- Sealing, trimming and finishing installed screens
- Inspecting, commissioning and securing completed installations
- Cleaning up glass waste, materials and the work area
Who is this for?
Suitable for contractors, workers, supervisors and businesses carrying out shower screen, mirror and glass balustrade installation activities.
Specific Job Steps & Hazards Covered
| Job Step / Activity | Potential Hazards |
|---|---|
| Site induction and setup |
|
| Unload and store glass |
|
| Inspect glass and fittings |
|
| Prepare access and work faces |
|
| Set out installation locations |
|
| Drill and install fixings |
|
| Install glass balustrades |
|
| Install glass fence panels |
|
| Install shower screen panels |
|
| Fit mirrors and whiteboards |
|
| Seal and trim screens |
|
| Inspect and commission installation |
|
| Clean up and demobilise |
|
Need to add specific site requirements?
Use the BlueSafe Portal to tailor this SWMS with site-specific details, job steps, hazards, controls and responsibilities before work starts.
Acceptance Guaranteed: If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.
Legislation & References
The template includes references relevant to the documented work, including:
- Applicable Commonwealth, state or territory WHS/OHS legislation and regulations.
- Applicable construction-work and high-risk construction-work requirements, including SWMS requirements where prescribed by the relevant jurisdiction.
- Model Code of Practice: Construction Work (guidance only; confirm adoption and legal status in the relevant jurisdiction).
- Model Code of Practice: How to Manage Work Health and Safety Risks (guidance only; confirm adoption and legal status in the relevant jurisdiction).
- Model Code of Practice: Managing the Risk of Falls at Workplaces (guidance only; confirm adoption and legal status in the relevant jurisdiction).
- Model Code of Practice: Hazardous Manual Tasks (guidance only; confirm adoption and legal status in the relevant jurisdiction).
- Model Code of Practice: Managing Risks of Plant in the Workplace (guidance only; confirm adoption and legal status in the relevant jurisdiction).
- Model Code of Practice: Managing Risks of Hazardous Chemicals in the Workplace (guidance only; confirm adoption and legal status in the relevant jurisdiction).
- AS 1288 Glass in buildings — Selection and installation.
- AS/NZS 2208 Safety glazing materials in buildings.
- AS 1170.1 Structural design actions — Permanent, imposed and other actions.
- National Construction Code, including applicable requirements for barriers, glazing and waterproofing.
- AS/NZS 1891 series Industrial fall-arrest systems and devices.
- AS/NZS 4576 Guidelines for scaffolding and AS/NZS 1576 series Scaffolding.
- AS/NZS 1337.1 Personal eye protection, AS/NZS 1715 and AS/NZS 1716 respiratory protection, AS/NZS 1270 hearing protectors, AS/NZS 2210.3 safety footwear and AS/NZS 3760 in-service inspection and testing of electrical equipment.
Standard SWMS Features (Click to Expand)
- Task-specific job steps, hazards and control measures
- Initial and residual risk ratings
- Assigned responsible persons for each job step
- Plant, equipment and PPE requirements where applicable
- Permits, qualifications and high-risk construction work details where applicable
- Worker consultation, sign-off and review sections
Suitable for Industries
Related templates
$79.50
$96.80
Includes all formats + 2 years updates
Acceptance guaranteed
If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.
$79.50
$96.80
One-time payment