Name: Shop Fitting SWMS
Brand: BlueSafe Online
SKU: prod_01KBPKX4D3XTMPCMR9ZQH181YF
Price: 79.50 AUD
Availability: InStock

Product Overview

This SWMS covers shop fitting work from planning and site setup through to installation, finishing and handover. It supports the identification and management of risks associated with materials, tools, services, fixtures, cutting, elevated work and completed areas.

Activities & Specific Tasks Covered

This document includes task-specific risk controls for:

Planning the work scope, site conditions and coordination
Establishing the site, access and work areas
Receiving and moving materials, plant and fixtures
Inspecting tools, power supplies and services
Setting out and marking installation locations
Cutting and fabricating components
Installing walls, joinery and fixtures
Working at elevated locations
Installing electrical components
Completing finishes, cleaning, inspection and handover

Who is this for?

Suitable for contractors, workers, supervisors and businesses carrying out shop fitting activities.

Specific Job Steps & Hazards Covered

Job Step / Activity	Potential Hazards
Pre-start planning	Unplanned work scope Unidentified building hazards Conflicting trades Worker fatigue Inadequate emergency response
Establish site and access	Unauthorised public entry Slips and trips Falling objects Blocked emergency egress Poor lighting Vehicle interaction
Receive materials and plant	Forklift strike Crush from loads Load shift Vehicle reversing Manual handling strain Damaged materials
Inspect tools and services	Electric shock Damaged power tools RCD failure Fire from leads Unexpected energisation Trips from cables
Set out and mark locations	Cuts from sharp edges Awkward postures Trip hazards Strike of concealed services Eye injury from drilling dust
Move fixtures into position	Musculoskeletal injury Crush between fixtures Toppling joinery Glazing breakage Pinch points Overloaded trolleys
Cut and fabricate components	Silica dust exposure Wood dust exposure Contact with cutting blade Flying particles Noise Fire from sparks Lacerations
Install walls and joinery	Falling fixture Power-tool injury Concealed services strike Sharp edges Overhead work Adhesive exposure Repetitive strain
Work at elevated locations	Fall from height Falling tools Ladder instability EWP crush Contact with overhead services Collapse of access equipment
Install electrical components	Electric shock Arc flash Unexpected energisation Fire Ceiling-space hazards Defective installation
Complete finishes and cleaning	Chemical exposure Slip from spills Cuts from waste Dust re-exposure Fire from solvent vapours Waste handling strain
Inspect and hand over	Unstable completed fixtures Unrectified defects Unauthorised energisation Residual materials Public exposure to defects

Need to add specific site requirements?

Use the BlueSafe Portal to tailor this SWMS with site-specific details, job steps, hazards, controls and responsibilities before work starts.

Acceptance Guaranteed: If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.

Legislation & References

The template includes references relevant to the documented work, including:

Applicable Commonwealth, state or territory WHS/OHS legislation and regulations.
Model Code of Practice: Construction work; confirm adoption and current status with the relevant jurisdictional WHS regulator.
Model Code of Practice: How to manage work health and safety risks; confirm adoption and current status with the relevant jurisdictional WHS regulator.
Model Code of Practice: Work health and safety consultation, co-operation and co-ordination; confirm adoption and current status with the relevant jurisdictional WHS regulator.
Model Code of Practice: Managing risks of plant in the workplace; confirm adoption and current status with the relevant jurisdictional WHS regulator.
Model Code of Practice: Managing electrical risks in the workplace; confirm adoption and current status with the relevant jurisdictional WHS regulator. The source notes that a danger tag does not itself isolate electrical equipment; use locks or other effective isolation controls.
Model Code of Practice: Hazardous manual tasks; confirm adoption and current status with the relevant jurisdictional WHS regulator. The source supports suitable equipment, adequate staffing, work pacing and worker consultation as controls.
Model Code of Practice: Managing the risk of falls at workplaces; confirm adoption and current status with the relevant jurisdictional WHS regulator.
Model Code of Practice: Managing noise and preventing hearing loss at work; confirm adoption and current status with the relevant jurisdictional WHS regulator.
Model Code of Practice: Managing risks of respirable crystalline silica in the workplace; confirm adoption and current status with the relevant jurisdictional WHS regulator. The source identifies fitting-out as construction work and requires planned controls for high-risk silica processing.
AS/NZS 3012 Electrical installations—Construction and demolition sites; AS/NZS 3760 In-service safety inspection and testing of electrical equipment; AS/NZS 4836 Safe working on or near low-voltage electrical installations and equipment.
AS 1891 series Industrial fall-arrest systems; AS/NZS 4576 Guidelines for scaffolding; AS 1657 Fixed platforms, walkways, stairways and ladders; AS/NZS 5532 Manufacturing requirements for single-point anchor device used for harness-based work at heights.
AS 1418 and AS 2550 series for cranes and EWP where applicable; AS 2359 series for industrial trucks; AS 4991 Lifting devices; AS 3775 Chain slings; AS 4497 Roundslings.
AS/NZS 1715 Selection, use and maintenance of respiratory protective equipment; AS/NZS 1716 Respiratory protective devices.

Standard SWMS Features (Click to Expand)

Task-specific job steps, hazards and control measures
Initial and residual risk ratings
Assigned responsible persons for each job step
Plant, equipment and PPE requirements where applicable
Permits, qualifications and high-risk construction work details where applicable
Worker consultation, sign-off and review sections

Shop Fitting SWMS

Activities covered include

Download immediately

Acceptance guaranteed