BlueSafe

Safe Use Of Oxyacetylene SWMS

This SWMS covers the safe use of oxyacetylene equipment, including planning, cylinder handling, system setup, heating or cutting, monitoring, shutdown and response to leaks or flashback.

Activities covered include

  • Plan the work and brief the team
  • Light and adjust the torch
  • Pack up equipment and complete sign-off

Download immediately

Your editable Word and PDF files are ready to download after purchase.

Acceptance guaranteed

If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.

Safe Use Of Oxyacetylene SWMS
  • 100% Compliant with Australian WHS Acts & Regulations
  • Fully Editable MS Word & PDF Formats Included
  • Pre-filled Content - Ready to Deploy Immediately
  • Customisable - Easily Add Your Logo & Site Details
  • Includes 2 Years of Free Compliance Updates

Product Overview

This SWMS covers the safe use of oxyacetylene equipment, including planning, cylinder handling, system setup, heating or cutting, monitoring, shutdown and response to leaks or flashback. It supports planning for gas, fire, explosion, fume, heat and equipment hazards.

Activities & Specific Tasks Covered

This document includes task-specific risk controls for:

  • Plan the work and brief the team
  • Prepare and control the work area
  • Transport, position and secure cylinders
  • Inspect equipment, hoses, regulators and connections
  • Connect and test the system
  • Set up ventilation and monitor the work area
  • Light and adjust the torch
  • Perform heating or cutting activities
  • Monitor for fire, sparks and surrounding conditions
  • Shut down and depressurise equipment
  • Respond to a gas leak or flashback
  • Pack up equipment and complete sign-off

Who is this for?

For contractors, workers, supervisors and businesses carrying out oxyacetylene work.

Specific Job Steps & Hazards Covered

Job Step / Activity Potential Hazards
Plan work and brief team
  • Unplanned hot work
  • Incorrect process selection
  • Untrained workers
  • Uncontrolled work changes
Prepare work area
  • Fire from sparks
  • Explosion from vapours
  • Unauthorised entry
  • Fume exposure
  • Trips from leads and hoses
Transport cylinders to location
  • Cylinder fall
  • Manual handling strain
  • Valve damage
  • Gas release
  • Vehicle movement
Position and secure cylinders
  • Cylinder projectile
  • Acetylene instability
  • Heat exposure
  • Gas accumulation
  • Oxygen enrichment
Inspect equipment before use
  • Gas leak
  • Regulator failure
  • Flashback
  • Hose rupture
  • Incorrect connections
Connect and test system
  • Gas release
  • Incorrect regulator pressure
  • Oxygen ignition
  • Flashback
  • Hose whip
Set up ventilation and monitoring
  • Welding fumes
  • Metal fume fever
  • Oxygen depletion
  • Oxygen enrichment
  • Toxic coating fumes
Light and adjust torch
  • Flashback
  • Burns from flame
  • Gas ignition
  • Eye injury
  • Unexpected flame direction
Perform heating or cutting
  • Fire and explosion
  • Burns from hot metal
  • Flying slag
  • Fume inhalation
  • Flashback
  • Damage to services
  • Heat stress
Monitor fire and surroundings
  • Delayed ignition
  • Fire spread
  • Smoke exposure
  • Unauthorised access
  • Loss of containment
Shut down and depressurise
  • Residual gas release
  • Flashback on shutdown
  • Burns from hot equipment
  • Unauthorised re-use
  • Cylinder valve damage
Respond to leak or flashback
  • Cylinder fire
  • Explosion
  • Gas accumulation
  • Burn injury
  • Asphyxiation
Pack up and sign off
  • Cylinder damage
  • Residual hot spots
  • Trip hazards
  • Unauthorised access
  • Defective equipment reuse

Need to add specific site requirements?

Use the BlueSafe Portal to tailor this SWMS with site-specific details, job steps, hazards, controls and responsibilities before work starts.

Acceptance Guaranteed: If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.

Legislation & References

The template includes references relevant to the documented work, including:

  • Applicable Commonwealth, state or territory WHS/OHS legislation and regulations, including duties to manage risks, provide safe plant and systems of work, manage hazardous chemicals and airborne contaminants, provide PPE, and consult workers.
  • Model Code of Practice: Welding processes, including guidance on managing welding risks, fire and explosion, compressed gases, fumes, burns, PPE and equipment maintenance.
  • Model Code of Practice: How to manage work health and safety risks.
  • Model Code of Practice: Managing risks of hazardous chemicals in the workplace.
  • Model Code of Practice: Managing the work environment and facilities.
  • AS 4839, Safety in welding and allied processes; AS 1674.1, Safety in welding and allied processes—Fire precautions; AS 4332, The storage and handling of gases in cylinders; AS/NZS 1715 and AS/NZS 1716, respiratory protective equipment; AS/NZS 2210, occupational protective footwear; AS/NZS 1337.1, personal eye protection.
  • Model Codes of Practice are guidance documents and only have legal effect where adopted or approved in the relevant jurisdiction.
Standard SWMS Features (Click to Expand)
  • Task-specific job steps, hazards and control measures
  • Initial and residual risk ratings
  • Assigned responsible persons for each job step
  • Plant, equipment and PPE requirements where applicable
  • Permits, qualifications and high-risk construction work details where applicable
  • Worker consultation, sign-off and review sections

Suitable for Industries

Metal Fabrication and Welding

$96.80

One-time payment