BlueSafe
Roof Tiling SWMS

Roof Tiling SWMS

  • • 100% Compliant with Australian WHS Acts & Regulations
  • • Fully Editable MS Word & PDF Formats Included
  • • Pre-filled Content – Ready to Deploy Immediately
  • • Customisable – Easily Add Your Logo & Site Details
  • • Includes 2 Years of Free Compliance Updates

Roof Tiling SWMS

Product Overview

This Roof Tiling Safe Work Method Statement (SWMS) is designed to identify, control, and minimise risks associated with all stages of roof tiling work on Australian construction sites. It is a comprehensive document that brings together multiple aspects of roof access, tile installation, manual handling, and working at height to support WHS compliance and safe, efficient operations.

Activities & Specific Tasks Covered

This document includes specific risk controls for:

  • Planning of roof tiling works, including site assessment, roof pitch, access points, and weather conditions
  • Safe access and egress to roofs using ladders, scaffolds, and temporary work platforms
  • Selection, inspection, and use of fall prevention systems such as roof guardrails, scaffolding, and perimeter protection
  • Use of fall arrest equipment, including harnesses, lanyards, and roof anchor points where required
  • Manual handling of roof tiles, ridge capping, and accessories to reduce strain and musculoskeletal injuries
  • Mechanical lifting of tiles and materials to roof level using hoists, cranes, or material lifts
  • Setting out, laying, and fixing of roof tiles, including cutting, nailing, clipping, and securing in high wind areas
  • Working near roof edges, penetrations, skylights, and fragile roofing materials
  • Use of power tools and hand tools for cutting, grinding, and drilling tiles and battens
  • Control of dust, noise, and debris generated during cutting and fixing operations
  • Weather-related risk management, including work in hot, wet, or windy conditions and securing materials
  • Housekeeping, waste management, and safe storage of tiles and materials on roofs and at ground level
  • Emergency response procedures for falls from height, dropped objects, and other roof tiling incidents

Who is this for?

This SWMS is designed for roof tilers, roofing contractors, builders, and site supervisors responsible for planning, overseeing, or carrying out roof tiling works on residential, commercial, and industrial projects.

Specific Job Steps & Hazards Covered

Job Step / Activity Potential Hazards
1. Preparation
  • Trip hazards, Falling objects
2. Site setup
  • Uneven surfaces, Electrical hazards
3. Ladder positioning
  • Falls from height, Uneven footing
4. Material handling
  • Manual handling injuries, Falling tools
5. Safety gear usage
  • Incorrect PPE, PPE failure
6. Tiling installation
  • Cut hazards, Falls from height
7. Waterproofing
  • Slip hazards, Chemical exposure
8. Cutting tiles
  • Hand injuries, Eye injuries, Noise
9. Cleanup
  • Trip hazards, Disposal hazards
10. Quality inspection
  • Falls from height, Structural insecurity
11. Anchor points
  • Fall arrest system failure, Inadequate anchor point placement
12. De-mobilization
  • Transportation issues, Manual handling injuries

Need to add specific site requirements?

Don't worry if a specific job step isn't listed above. Once you purchase, simply log in to your Client Portal and add your own custom job steps at no extra cost. We take care of the hard work—creating the hazards and control measures for free—to ensure your document is compliant within minutes.

Legislation & References

This document was researched and developed to align with:

  • Work Health and Safety Act 2011
  • Work Health and Safety Regulations 2017
  • Managing the Risk of Falls at Workplaces Code of Practice: Guidance on preventing falls from height during roof tiling activities
  • Construction Work Code of Practice: Requirements for planning and undertaking construction work, including roofing
  • Managing Risks of Plant in the Workplace Code of Practice: Safe use of ladders, hoists, and other plant used in roof tiling
  • Hazardous Manual Tasks Code of Practice: Controls for lifting, carrying, and handling roof tiles and materials
  • AS/NZS 1891 Industrial fall-arrest systems and devices: Selection, use, and maintenance of fall arrest equipment for roof work
  • AS/NZS 4576 Guidelines for scaffolding: Safe use of scaffolding systems for roof access and edge protection
Standard SWMS Features (Click to Expand)
  • Operational guidelines, with a step-by-step approach to safe work
  • Possible hazards that may be encountered
  • Step-by-step safety procedures to follow
  • Before work starts – Guidelines and Checks
  • Safety measures and guides
  • Operational Safety Checks
  • Before and After Risk Ratings
  • Risk Assessment Matrix
  • High Risk Work Involved
  • Emergency Evacuation Procedure
  • Plant and Equipment
  • Qualifications and Permits
  • Specific Personal Protective Equipment (PPE)
  • Company Personnel Sign-off form

$64.95

Safe Work Australia Aligned