Name: Repair Or Replace Sanitary Plumbing Stackwork SWMS
Brand: BlueSafe Online
SKU: prod_01M283JK6VQC7X37A59TC8WAF0
Price: 96.80 AUD
Availability: InStock

Product Overview

This SWMS covers repairing or replacing sanitary plumbing stackwork, including inspection, isolation, removal, installation, testing and handover. It supports planning and risk management for access, services, contaminated waste, pipework, tools and work-area conditions.

Activities & Specific Tasks Covered

This document includes task-specific risk controls for:

Review the scope and inspect the work site
Set up the work area and access arrangements
Isolate sanitary and electrical services
Set up elevated access where required
Check tools and lifting gear
Open and drain existing stackwork
Cut and remove damaged stack sections
Install supports and replacement pipework
Join, seal and fire-stop the work
Test and recommission services
Clean the contaminated work area
Remove access equipment and hand over the area

Who is this for?

Suitable for contractors, workers, supervisors and businesses carrying out sanitary plumbing stackwork repair or replacement.

Specific Job Steps & Hazards Covered

Job Step / Activity	Potential Hazards
Review scope and inspect site	Unidentified asbestos-containing material Hidden services Unsafe work sequence Sewer gas exposure Unplanned height work Unauthorised alterations
Establish work area and access	Public entry Falling objects Slips and trips Occupied amenities Exposure to sewage Vehicle interaction
Isolate sanitary and electrical services	Sewage discharge Backflow flooding Electric shock Unexpected pump operation Exposure to contaminated waste Property damage
Set up elevated access	Fall over two metres Scaffold collapse Ladder slip Fall through ceiling Dropped tools Contact with overhead services
Check tools and lifting gear	Electric shock Cuts from defective tools Lifting gear failure Noise exposure Dust generation Uncontrolled load movement
Open and drain stackwork	Sewage splash Sewer gases Biological contamination Sharp pipe edges Unexpected discharge Confined work area
Cut and remove damaged stack	Falling pipe section Crush injury Sharp edges Silica or asbestos dust Falling objects Overexertion
Install supports and replacement pipe	Manual handling strain Dropped pipework Drilling dust Anchor failure Hand injuries Falls from access platform
Join, seal and fire-stop	Solvent vapours Chemical burns Fire from ignition source Poor joint integrity Exposure to sealant fumes Hand injuries
Test and recommission services	Leakage and flooding Sewage backflow Electrical contact Slip hazards Pipe support failure Exposure to contaminated water
Clean contaminated work area	Biological contamination Sharps injury Chemical exposure Asbestos fibre release Slips and trips Waste handling strain
Remove access and hand over	Fall during dismantling Dropped objects Unauthorised service use Incomplete fire sealing Residual site hazards Documentation errors

Need to add specific site requirements?

Use the BlueSafe Portal to tailor this SWMS with site-specific details, job steps, hazards, controls and responsibilities before work starts.

Acceptance Guaranteed: If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.

Legislation & References

The template includes references relevant to the documented work, including:

Applicable Commonwealth, state or territory WHS/OHS legislation and regulations.
Model Code of Practice: How to manage work health and safety risks.
Model Code of Practice: Construction work.
Model Code of Practice: Managing the risk of falls at workplaces.
Model Code of Practice: Managing electrical risks in the workplace.
Model Code of Practice: Managing the risks of plant in the workplace.
Model Code of Practice: Hazardous manual tasks.
Model Code of Practice: Confined spaces.
Model Code of Practice: How to manage and control asbestos in the workplace.
Model Code of Practice: How to safely remove asbestos.
Model Code of Practice: Managing risks of hazardous chemicals in the workplace.
AS/NZS 3500.2 Plumbing and drainage—Sanitary plumbing and drainage; AS/NZS 1891 Industrial fall-arrest systems and devices; AS/NZS 4576 Guidelines for scaffolding; AS 1657 Fixed platforms, walkways, stairways and ladders; AS/NZS 3012 Electrical installations—Construction and demolition sites; AS 2865 Confined spaces; AS/NZS 1715 Selection, use and maintenance of respiratory protective equipment; AS 1319 Safety signs for the occupational environment.
Model Codes are guidance and should be checked against the approved code and legal requirements applying in the jurisdiction. The knowledge base notes that codes may be used as evidence of reasonably practicable controls, while other methods may be used where they provide an equivalent or higher standard of health and safety.

Standard SWMS Features (Click to Expand)

Task-specific job steps, hazards and control measures
Initial and residual risk ratings
Assigned responsible persons for each job step
Plant, equipment and PPE requirements where applicable
Permits, qualifications and high-risk construction work details where applicable
Worker consultation, sign-off and review sections

Repair Or Replace Sanitary Plumbing Stackwork SWMS

Activities covered include

Download immediately

Acceptance guaranteed