Name: Jack Hammer Risk Assessment
Brand: BlueSafe Online
SKU: prod_01KBY6RAB7G3Y0SFNN3RJN2K4A
Price: 79.50 AUD
Availability: InStock

Product Overview

This risk assessment covers jack hammer work, including planning, equipment condition, dust, noise, vibration, debris, services, stability and clean-up. It supports identifying changing conditions and managing risks to workers, nearby people and the work area.

Activities & Risks Covered

This assessment addresses activities and risks including:

Plan the work and assess the site
Check tool condition, leads and attachments
Manage dust generated during jack hammering
Manage noise exposure and communication impacts
Manage vibration, posture and physical strain
Set exclusion areas for flying debris and nearby people
Assess structural stability before and during breaking
Identify services, electrical hazards and hazardous atmospheres
Maintain access, housekeeping and safe material handling
Prepare for emergencies and changing conditions

Who is this for?

For contractors, workers, supervisors and businesses carrying out jack hammer activities.

Activities & Hazards Covered

Activity	Potential Hazards
Planning and site assessment	Unidentified underground or overhead services Unsuitable jack hammer selection for the task Unstable ground, slab, wall or adjoining structure Unplanned exposure of other workers or the public to noise, dust or debris
Tool condition, leads and attachments	Electric shock from damaged leads or unsafe equipment Loss of control due to faulty trigger, handles or anti-vibration mounts Flying metal fragments from damaged bits, chisels or retainers Unexpected breakdown causing unsafe workarounds
Dust and respirable crystalline silica	Respirable crystalline silica generated from jack hammering concrete or masonry Inhalation of airborne dust by the operator and nearby workers Secondary dust exposure during clean-up or when slurry dries
Noise exposure	Excessive noise causing hearing damage Reduced ability to hear instructions, alarms or mobile plant Increased fatigue and reduced concentration
Vibration and musculoskeletal strain	Hand-arm vibration from prolonged tool use Back, shoulder, wrist and knee strain from sustained force and awkward posture Fatigue leading to reduced control of the jack hammer
Exclusion zone, flying debris and public protection	Flying concrete, rock or steel fragments Workers or members of the public entering the line of fire Eye and face injuries from ejected material
Structural stability and collapse	Unplanned collapse of walls, slabs, footings, trenches or surrounding structure Undermining or loss of support to adjoining areas Falling objects and debris during breaking
Services, electrical and hazardous atmosphere risks	Contact with live electrical services Strike of gas, water, sewer or communications services Hazardous atmosphere or exhaust fume build-up in enclosed or poorly ventilated areas Slip risk from water used for dust suppression around leads and access ways
Housekeeping, access and manual handling	Slips, trips and falls from rubble, hoses, leads and slurry Manual handling injuries when moving the jack hammer or spoil Cuts and crush injuries from sharp rubble or dropped tool components
Emergency response and change conditions	Delayed response to injury, electric shock, collapse or dust incident Continuing work after conditions become unsafe Poor coordination during an emergency

Need to tailor this risk assessment?

Use the BlueSafe Portal to add site-specific activities, hazards, controls, responsibilities and review details before the assessment is put into use.

Acceptance Guaranteed: If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.

Legislation & References

The template records model guidance used to inform the documented controls. Applicable WHS/OHS laws and adopted Codes vary by state or territory, so confirm the current local requirements when tailoring the assessment:

Model guidance: Model Code of Practice: Managing the risk of fatigue at work — Provide sufficient breaks while at work; p. 30.
Model guidance: Model Code of Practice: Managing electrical risks in the workplace — 2.1 Identifying the hazards; p. 14.
Model guidance: Model Code of Practice: Managing the work environment and facilities — 2. The work environment; p. 13.
Model guidance: Model Code of Practice: Hazardous manual tasks — 4.1 The hierarchy of control measures; p. 31.
Model guidance: Model Code of Practice: First aid in the workplace — 3. First aid equipment, facilities and training; p. 12.
Model guidance: Model Code of Practice: How to manage work health and safety risks — 5. Step 4 — How to review controls; p. 27.
Model guidance: Model Code of Practice: Managing noise and preventing hearing loss at work — 5. Controlling the risks; p. 29.
Model guidance: Model Code of Practice: Excavation work — 2.3. Controlling the risks; p. 17.
Model guidance: Model Code of Practice: Managing risks of plant in the workplace — Plant hazard identification — Traffic movements in the workplace; p. 17.

Standard Risk Assessment Features (Click to Expand)

Activity-specific hazard identification and control measures
Initial and residual risk ratings
Assigned responsible persons for each activity
Risk matrix and assessment classification
Review, monitoring and sign-off fields
Site-specific customisation before use

Jack Hammer Risk Assessment

Activities covered include

Download immediately

Acceptance guaranteed