Installation Of Roller Shutters SWMS
This SWMS covers roller shutter installation activities, from site review and isolation through to component installation, tensioning, connection, testing and handover.
Activities covered include
- Review the scope and site conditions
- Install brackets and barrel components
- Clean up and hand over the work area
Download immediately
Your editable Word and PDF files are ready to download after purchase.
Acceptance guaranteed
If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.
- 100% Compliant with Australian WHS Acts & Regulations
- Fully Editable MS Word & PDF Formats Included
- Pre-filled Content - Ready to Deploy Immediately
- Customisable - Easily Add Your Logo & Site Details
- Includes 2 Years of Free Compliance Updates
Product Overview
This SWMS covers roller shutter installation activities, from site review and isolation through to component installation, tensioning, connection, testing and handover. It supports planning for stored energy, moving components, access, electrical contact, sharp edges and work-area risks.
Activities & Specific Tasks Covered
This document includes task-specific risk controls for:
- Review the scope and site conditions
- Establish work-area isolation
- Unload shutter components
- Inspect tools and access equipment
- Remove an existing door assembly where required
- Set out fixing locations
- Install brackets and barrel components
- Fit guide tracks and droppers
- Install the curtain and rollers
- Tension springs and cables
- Connect, test and commission the shutter
- Clean up and hand over the work area
Who is this for?
Suitable for contractors, workers, supervisors and businesses carrying out roller shutter installation activities.
Specific Job Steps & Hazards Covered
| Job Step / Activity | Potential Hazards |
|---|---|
| Review scope and site conditions |
|
| Establish work area isolation |
|
| Unload shutter components |
|
| Inspect tools and access equipment |
|
| Remove existing door assembly |
|
| Set out fixing locations |
|
| Install brackets and barrel |
|
| Fit guide tracks and droppers |
|
| Install curtain and rollers |
|
| Tension springs and cables |
|
| Connect door operator |
|
| Test and commission shutter |
|
| Clean up and hand over |
|
Need to add specific site requirements?
Use the BlueSafe Portal to tailor this SWMS with site-specific details, job steps, hazards, controls and responsibilities before work starts.
Acceptance Guaranteed: If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.
Legislation & References
The template includes references relevant to the documented work, including:
- Applicable Commonwealth, state or territory WHS/OHS legislation and regulations.
- Safe Work Australia Model Code of Practice: Construction work (guidance only; confirm adoption in the relevant jurisdiction).
- Safe Work Australia Model Code of Practice: Managing the risks of plant in the workplace, including hazard identification, hierarchy of controls, maintenance and SWMS requirements for high risk construction work.
- Safe Work Australia Model Code of Practice: Managing electrical risks in the workplace; electrical work on energised equipment or installations must be undertaken only by a licensed or otherwise authorised competent person under applicable legislation.
- Safe Work Australia model guidance: How to manage work health and safety risks; Work health and safety consultation, cooperation and coordination; Hazardous manual tasks; Managing the risk of falls at workplaces; Managing noise and preventing hearing loss at work; Managing the work environment and facilities; First aid in the workplace; Managing risks of hazardous chemicals in the workplace.
- AS/NZS 3000 Electrical installations; AS/NZS 3012 Electrical installations—Construction and demolition sites; AS/NZS 3760 In-service safety inspection and testing of electrical equipment; AS/NZS 1891 Industrial fall-arrest systems and devices; AS/NZS 1576 Scaffolding; AS 4576 Guidelines for scaffolding; AS 2550 Cranes—Safe use; AS 1418 Cranes, hoists and winches; AS/NZS 4991 Lifting devices; AS 4024 Safety of machinery series; AS/NZS 45001 Occupational health and safety management systems.
- Confirm applicable jurisdictional requirements, manufacturer instructions, building approval requirements and site rules before work begins; model laws and model Codes of Practice do not automatically have legal effect in every Australian jurisdiction.
Standard SWMS Features (Click to Expand)
- Task-specific job steps, hazards and control measures
- Initial and residual risk ratings
- Assigned responsible persons for each job step
- Plant, equipment and PPE requirements where applicable
- Permits, qualifications and high-risk construction work details where applicable
- Worker consultation, sign-off and review sections
Suitable for Industries
Related templates
$79.50
$96.80
Includes all formats + 2 years updates
Acceptance guaranteed
If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.
$79.50
$96.80
One-time payment