Name: Installation of PVC Pipe in Trench Greater Than 1.5 Metres SWMS
Brand: BlueSafe Online
SKU: prod_01M283JCC1CFEWN75BGESX0GRW
Price: 96.80 AUD
Availability: InStock

Product Overview

This SWMS covers installing PVC pipe in a trench greater than 1.5 metres deep, including excavation, trench protection, access checks, pipe installation, testing and demobilisation. It supports work planning and risk management by addressing deeper excavation conditions, atmosphere, plant, lifting and pressurised testing.

Activities & Specific Tasks Covered

This document includes task-specific risk controls for:

Review plans, scope, pipe alignment and trench requirements
Establish exclusion zones around the trench and work area
Position plant and materials while managing trench-edge conditions
Excavate and expose underground services
Install trench protection and manage ground-collapse hazards
Inspect access, escape and atmospheric conditions
Prepare bedding and the trench base
Lift and lower PVC pipe into the trench
Align and join pipe
Install pipe surround and markers
Backfill and compact the trench
Test, inspect, demobilise and complete records

Who is this for?

Suitable for contractors, workers, supervisors and businesses carrying out PVC pipe installation in trenches greater than 1.5 metres deep.

Specific Job Steps & Hazards Covered

Job Step / Activity	Potential Hazards
Review plans and scope	Incorrect pipe alignment Unidentified services Inadequate trench design Unauthorised work changes
Establish site exclusion zone	Unauthorised trench entry Public exposure Vehicle intrusion Falls into trench
Position plant and materials	Plant roll-over Trench edge collapse Crush from swinging load Plant-person collision
Excavate and expose services	Underground services strike Electric shock Gas release Trench collapse Flying debris
Install trench protection	Ground collapse Engulfment Crush from trench shield Falling objects Plant interaction
Inspect access and atmosphere	Restricted escape Oxygen deficiency Toxic atmosphere Flammable atmosphere Slip on wet access
Prepare bedding and base	Manual handling strain Silica dust Slips on uneven base Trench wall disturbance Hand-tool injury
Lift and lower PVC pipe	Crush from suspended pipe Dropped load Pipe roll-away Lifting-gear failure Plant interaction
Align and join pipe	Crush points Solvent vapours Manual handling strain Incorrect jointing Sharp pipe edges
Install surround and markers	Pipe damage Plant strike Dust exposure Trench collapse Manual handling strain
Backfill and compact trench	Trench collapse Compactor strike Plant roll-over Buried worker Service damage
Test and inspect installation	Pressurised test failure Pipe movement Water release Slip hazards Unauthorised access
Demobilise and sign off	Residual open excavation Plant-person interaction Trips and slips Waste exposure Incomplete records

Need to add specific site requirements?

Use the BlueSafe Portal to tailor this SWMS with site-specific details, job steps, hazards, controls and responsibilities before work starts.

Acceptance Guaranteed: If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.

Legislation & References

The template includes references relevant to the documented work, including:

Applicable Commonwealth, state or territory WHS/OHS legislation and regulations, including duties to manage risks, consult workers, control construction work, plant, hazardous chemicals, excavation work and high-risk construction work.
Model Code of Practice: Excavation Work — guidance for trench collapse controls, services, access, inspections, atmospheric hazards and mobile plant.
Model Code of Practice: Construction Work — guidance for high-risk construction work and SWMS requirements.
Model Code of Practice: Managing the Risks of Plant in the Workplace.
Model Code of Practice: Hazardous Manual Tasks.
Model Code of Practice: Managing Risks of Hazardous Chemicals in the Workplace.
AS/NZS 1260 PVC-U pipes and fittings for drain, waste and vent application.
AS 4744.1 Steel shoring and trench lining equipment.
AS 2550 series Cranes, hoists and winches — Safe use.
AS 4991 Lifting devices.
AS/NZS 3012 Electrical installations — Construction and demolition sites.
AS/NZS 1715 Selection, use and maintenance of respiratory protective equipment.
AS/NZS 1891 series Industrial fall-arrest systems and devices, where fall protection is selected following risk assessment.

Standard SWMS Features (Click to Expand)

Task-specific job steps, hazards and control measures
Initial and residual risk ratings
Assigned responsible persons for each job step
Plant, equipment and PPE requirements where applicable
Permits, qualifications and high-risk construction work details where applicable
Worker consultation, sign-off and review sections

Installation of PVC Pipe in Trench Greater Than 1.5 Metres SWMS

Included with your purchase