General Locksmithing Door Hardware and Lock Installation SWMS

This SWMS covers general locksmithing, door hardware and lock installation activities from job review through to testing and handover.
Activities covered include
- Review the job and authority to proceed
- Mark and drill doors
- Test security and egress before handover
- Compliant with Australian WHS Acts & Regulations
- Fully Editable MS Word & PDF Formats Included
- Pre-filled Content - Ready to Deploy Immediately
Free company branding
Your logo, ABN and business details added at no extra cost.
2 years of free updates
Compliance updates included for two years, with updated documents available in your portal.
Acceptance guaranteed
Free revisions to meet your client or principal's review requirements, with resubmission support until accepted.
Product Overview
This SWMS covers general locksmithing, door hardware and lock installation activities from job review through to testing and handover. It supports work planning and risk management by addressing access, door hardware, tools, keys, egress and work-area hazards.
Activities & Specific Tasks Covered
This document includes task-specific risk controls for:
- Review the job and authority to proceed
- Establish the work area
- Protect emergency egress
- Inspect doors and existing hardware
- Prepare tools and plant
- Cut and duplicate keys
- Mark and drill doors
- Install locks and deadbolts
- Rekey and service cylinders
- Remove stuck keys
- Repair specialist hardware
- Test security and egress before handover
Who is this for?
For contractors, workers, supervisors and businesses carrying out locksmithing, door hardware and lock installation activities.
Specific Job Steps & Hazards Covered
| Job Step / Activity | Potential Hazards |
|---|---|
| Review job and authority |
|
| Establish work area |
|
| Protect emergency egress |
|
| Inspect door and hardware |
|
| Prepare tools and plant |
|
| Cut and duplicate keys |
|
| Mark and drill door |
|
| Install locks and deadbolts |
|
| Rekey and service cylinders |
|
| Remove stuck keys |
|
| Repair specialist hardware |
|
| Test security and egress |
|
| Clean up and hand over |
|
Need to add specific site requirements?
Use the BlueSafe Portal to tailor this SWMS with site-specific details, job steps, hazards, controls and responsibilities before work starts.
Acceptance Guaranteed: If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.
Legislation & References
The template includes references relevant to the documented work, including:
- Applicable Commonwealth, state or territory WHS/OHS legislation and regulations.
- Applicable electrical safety legislation, regulations and licensing requirements in the relevant jurisdiction for electrical work.
- Model Code of Practice: How to Manage Work Health and Safety Risks.
- Model Code of Practice: Work Health and Safety Consultation, Cooperation and Coordination.
- Model Code of Practice: Hazardous Manual Tasks.
- Model Code of Practice: Managing Risks of Plant in the Workplace.
- Model Code of Practice: Managing Electrical Risks in the Workplace.
- Model Code of Practice: Managing Risks of Hazardous Chemicals in the Workplace.
- Model Code of Practice: Managing the Risk of Falls at Workplaces.
- Model Code of Practice: First Aid in the Workplace.
- AS/NZS 1337.1 Personal eye-protection.
- AS/NZS 1270 Acoustics—Hearing protectors.
- AS/NZS 1716 Respiratory protective devices.
- AS/NZS 2210.3 Personal protective equipment—Safety footwear.
- AS 1428.1 Design for access and mobility, where accessibility requirements apply.
- National Construction Code and applicable fire safety, exit-door and building approval requirements.
Standard SWMS Features (Click to Expand)
- Task-specific job steps, hazards and control measures
- Initial and residual risk ratings
- Assigned responsible persons for each job step
- Plant, equipment and PPE requirements where applicable
- Permits, qualifications and high-risk construction work details where applicable
- Worker consultation, sign-off and review sections
Suitable for Industries
Related templates
$79.50
$96.80
Includes free branding + 2 years of free updates
$79.50
$96.80
Free branding + 2 years of updates