Plasterboard Installation Drywall and Sheeting SWMS

Product Overview

This SWMS covers plasterboard installation, drywall and sheeting work from planning and material handling through to fixing, repairs, clean-up and sign-off. It supports planning work steps and managing hazards including falls, dust, sharp edges, manual handling and concealed services.

Activities & Specific Tasks Covered

This document includes task-specific risk controls for:

• Plan the work, confirm sheet requirements and complete site induction
• Deliver, unload and store sheets, steel and related materials
• Set up access arrangements and controls for falls, openings and falling items
• Set out steel framing and manage sharp edges, trips and manual tasks
• Measure and cut plasterboard while managing dust, noise and cutting hazards
• Lift, position and hang sheets, including overhead work
• Fix sheets with screws and manage repetitive work and falling-sheet hazards
• Drill anchors and penetrations while checking for concealed services
• Install corner beads and trims using cutting tools and adhesives
• Repair existing plasterboard while managing damaged linings, dust and potential asbestos-containing material
• Trim joints and openings and control knife, dust and waste hazards
• Clean the area, secure materials and complete sign-off

Who is this for?

Suitable for contractors, workers, supervisors and businesses carrying out plasterboard installation, drywall and sheeting activities.

Specific Job Steps & Hazards Covered

Legislation & References

The template includes references relevant to the documented work, including:

• Applicable Commonwealth, state or territory WHS/OHS legislation and regulations.
• Model Code of Practice: Construction Work, as adopted or approved in the relevant jurisdiction.
• Model Code of Practice: How to Manage Work Health and Safety Risks, as adopted or approved in the relevant jurisdiction.
• Model Code of Practice: Hazardous Manual Tasks, as adopted or approved in the relevant jurisdiction.
• Model Code of Practice: Managing the Risk of Falls at Workplaces, as adopted or approved in the relevant jurisdiction.
• Model Code of Practice: Managing Electrical Risks in the Workplace, as adopted or approved in the relevant jurisdiction.
• Model Code of Practice: Managing the Risks of Plant in the Workplace, as adopted or approved in the relevant jurisdiction.
• Model Code of Practice: Managing Noise and Preventing Hearing Loss at Work, as adopted or approved in the relevant jurisdiction.
• Model Code of Practice: Managing Risks of Respirable Crystalline Silica in the Workplace, as adopted or approved in the relevant jurisdiction; confirm material composition from supplier information because plasterboard and wall panels may contain crystalline silica.
• Model Code of Practice: How to Manage and Control Asbestos in the Workplace, and How to Safely Remove Asbestos, as adopted or approved in the relevant jurisdiction.
• AS/NZS 1715 Selection, use and maintenance of respiratory protective equipment; AS/NZS 1337.1 Personal eye-protection; AS/NZS 2210.3 Safety footwear; AS/NZS 3012 Electrical installations—Construction and demolition sites; AS/NZS 3760 In-service safety inspection and testing of electrical equipment; AS/NZS 60335.2.69 Class H vacuum cleaners; AS/NZS 1891 Industrial fall-arrest systems; AS 4576 Guidelines for scaffolding; and manufacturer instructions.

---

Standard SWMS Features (Click to Expand)

• Task-specific job steps, hazards and control measures
• Initial and residual risk ratings
• Assigned responsible persons for each job step
• Plant, equipment and PPE requirements where applicable
• Permits, qualifications and high-risk construction work details where applicable
• Worker consultation, sign-off and review sections