Fire Protection System Installation (Alarms and Sprinklers) SWMS

Product Overview

This SWMS covers installation work for fire protection systems, including alarms and sprinklers, from planning and material delivery through to testing, restoration and review. It supports planning for access, electrical systems, falls, falling objects, pipework, dust, water release and system impairment hazards.

Activities & Specific Tasks Covered

This document includes task-specific risk controls for:

• Plan work and consult on system impairment, work conflicts, design information and emergency response.
• Set up the work area and manage access, lighting, slips, trips, falling objects and vehicles.
• Deliver and position materials while managing suspended loads, pipe movement, plant and manual handling.
• Access ceiling work areas and manage falls, overhead services and dropped tools.
• Isolate electrical systems and manage electrical, alarm and existing-wiring hazards.
• Install alarm containment, cabling, smoke detectors and heat detectors.
• Install sprinkler pipework, in-ground fire main and relocated sprinkler systems.
• Apply fireproofing products while managing dust, chemical contact, overspray and handling hazards.
• Test and commission systems, then restore systems and complete sign-off.
• Demobilise the work area and review residual hazards.

Who is this for?

Suitable for contractors, workers, supervisors and businesses carrying out fire protection system installation activities.

Specific Job Steps & Hazards Covered

Legislation & References

The template includes references relevant to the documented work, including:

• Applicable Commonwealth, state or territory WHS/OHS legislation and regulations.
• Model Code of Practice: Construction Work; confirm adoption and legal status in the jurisdiction. The model construction-work guidance identifies SWMS requirements and related guidance for falls, electrical work, asbestos, manual tasks and confined spaces.
• Model Code of Practice: Managing the Risk of Falls at Workplaces; confirm adoption and legal status in the jurisdiction. It requires effective emergency and rescue arrangements where fall-arrest systems are used.
• Model Code of Practice: Managing Risks of Plant in the Workplace; confirm adoption and legal status in the jurisdiction.
• Model Code of Practice: Hazardous Manual Tasks; confirm adoption and legal status in the jurisdiction.
• Model Code of Practice: Managing Risks of Hazardous Chemicals in the Workplace; confirm adoption and legal status in the jurisdiction. It supports maintaining effective controls and returning impaired fire protection to service promptly.
• Model Code of Practice: Confined Spaces; confirm adoption and legal status in the jurisdiction.
• AS 1670.1 Fire detection, warning, control and intercom systems—System design, installation and commissioning.
• AS 2118.1 Automatic fire sprinkler systems—General systems.
• AS 2419.1 Fire hydrant installations—System design, installation and commissioning.
• AS 1851 Routine service of fire protection systems and equipment.
• AS/NZS 3000 Electrical installations (Wiring Rules).
• AS/NZS 3012 Electrical installations—Construction and demolition sites.
• AS/NZS 1891 Industrial fall-arrest systems and devices.
• AS/NZS 2550 Cranes, hoists and winches—Safe use.
• AS 1742.3 Manual of uniform traffic control devices—Traffic control for works on roads.
• AS 4970 Protection of trees on development sites where excavation is near protected trees.

---

Standard SWMS Features (Click to Expand)

• Task-specific job steps, hazards and control measures
• Initial and residual risk ratings
• Assigned responsible persons for each job step
• Plant, equipment and PPE requirements where applicable
• Permits, qualifications and high-risk construction work details where applicable
• Worker consultation, sign-off and review sections