Explosive Power Tools Gas Pneumatic and Powder Actuated SWMS

This SWMS covers work with gas, pneumatic and powder-actuated power tools, from planning through to records and sign-off.
Activities covered include
- Plan work and brief the crew
- Load powder-actuated tools
- Clean, demobilise and complete records
- Compliant with Australian WHS Acts & Regulations
- Fully Editable MS Word & PDF Formats Included
- Pre-filled Content - Ready to Deploy Immediately
Free company branding
Your logo, ABN and business details added at no extra cost.
2 years of free updates
Compliance updates included for two years, with updated documents available in your portal.
Acceptance guaranteed
Free revisions to meet your client or principal's review requirements, with resubmission support until accepted.
Product Overview
This SWMS covers work with gas, pneumatic and powder-actuated power tools, from planning through to records and sign-off. It supports risk management for tool operation, fastening work, cartridges, fuel cells, pneumatic supplies, jams and work-area clean-up.
Activities & Specific Tasks Covered
This document includes task-specific risk controls for:
- Plan work and brief the crew
- Inspect substrates and identify services
- Establish an exclusion area
- Store cartridges and fuel cells
- Complete tool pre-start inspections
- Set up pneumatic supply equipment
- Load powder-actuated tools
- Operate powder-actuated tools
- Operate gas-powered fastening tools
- Operate pneumatic fastening tools
- Manage tool misfires and jams
- Clean, demobilise and complete records
Who is this for?
Suitable for contractors, workers, supervisors and businesses using gas, pneumatic or powder-actuated power tools.
Specific Job Steps & Hazards Covered
| Job Step / Activity | Potential Hazards |
|---|---|
| Plan work and brief crew |
|
| Inspect substrate and services |
|
| Establish work area exclusion |
|
| Store cartridges and fuel cells |
|
| Complete tool pre-start inspection |
|
| Set up pneumatic supply |
|
| Load powder-actuated tool |
|
| Operate powder-actuated tool |
|
| Operate gas-powered tool |
|
| Operate pneumatic fastening tool |
|
| Manage misfires and jams |
|
| Clean work area and equipment |
|
| Demobilise and review work |
|
| Complete records and sign-off |
|
Need to add specific site requirements?
Use the BlueSafe Portal to tailor this SWMS with site-specific details, job steps, hazards, controls and responsibilities before work starts.
Acceptance Guaranteed: If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.
Legislation & References
The template includes references relevant to the documented work, including:
- Applicable Commonwealth, state or territory WHS/OHS legislation and regulations, including duties to provide and maintain safe plant, manage workplace risks, provide information, training, instruction, supervision, consultation and suitable PPE.
- Model Code of Practice: How to manage work health and safety risks (November 2024) — identify hazards, apply the hierarchy of controls and review controls.
- Model Code of Practice: Managing the risks of plant in the workplace (2021) — plant selection, inspection, maintenance, guarding, isolation and review of controls.
- Model Code of Practice: Construction work (November 2024) — construction-site PPE, falling-object and exclusion-zone controls; explosive-powered tools are identified as a hearing-risk source.
- Model Code of Practice: Managing noise and preventing hearing loss at work.
- Model Code of Practice: Hazardous manual tasks.
- Model Code of Practice: Managing risks of hazardous chemicals in the workplace.
- Model Code of Practice: How to manage and control asbestos in the workplace — do not disturb suspected asbestos with power or pneumatic tools unless lawful controlled methods are confirmed.
- AS/NZS 1873 series, Power-actuated (PA) hand-held fastening tools.
- AS/NZS 1337.1, Personal eye-protection equipment; AS/NZS 1270, Hearing protectors; AS/NZS 2210.3, Safety protective footwear; AS/NZS 2161.1, Occupational protective gloves.
- AS ISO 5349.1:2013, Mechanical vibration — measurement and evaluation of human exposure to hand-transmitted vibration, as relevant to pneumatic-tool use.
Standard SWMS Features (Click to Expand)
- Task-specific job steps, hazards and control measures
- Initial and residual risk ratings
- Assigned responsible persons for each job step
- Plant, equipment and PPE requirements where applicable
- Permits, qualifications and high-risk construction work details where applicable
- Worker consultation, sign-off and review sections
Suitable for Industries
Related templates
$79.50
$96.80
Includes free branding + 2 years of free updates
$79.50
$96.80
Free branding + 2 years of updates