Name: Execute Plumbing Tasks SWMS
Brand: BlueSafe Online
SKU: prod_01M283J7E8S7FSQBQMKS3J2RCT
Price: 96.80 AUD
Availability: InStock

Product Overview

This SWMS covers planning, installation, testing and handover activities for plumbing tasks. It supports work planning and risk management for services, excavations, pipework, hot work, pressure, silica dust and chemical exposure.

Activities & Specific Tasks Covered

This document includes task-specific risk controls for:

Review the scope and plan the work
Set up the work area and manage access
Isolate and verify existing services
Unload and inspect equipment and materials
Excavate and expose services where required
Install underground pipework
Cut and drill penetrations
Assemble, support and join pipework and fittings
Conduct hot work where required
Test gas, water and drainage pipework
Clean up and hand over the work area

Who is this for?

Suitable for contractors, workers, supervisors and businesses carrying out plumbing tasks.

Specific Job Steps & Hazards Covered

Job Step / Activity	Potential Hazards
Review scope and plan work	Incorrect service information Unplanned work changes Inadequate worker competency Interface with other trades Emergency response delay
Set up work area	Unauthorised entry Slips and trips Vehicle interaction Falling materials Poor access and egress
Isolate and verify services	Electric shock Water release Gas release Stored pressure Flooding
Unload and inspect equipment	Manual handling strain Crush from pipe bundles Damaged electrical tools Plant movement Sharp edges
Excavate and expose services	Underground services strike Trench collapse Plant collision Falling into excavation Contaminated atmosphere Spoil pile collapse
Install underground pipework	Trench collapse Manual handling strain Pipe movement Biological contamination Restricted egress
Cut and drill penetrations	Respirable crystalline silica Electric shock Kickback from tools Flying fragments Hidden services Noise
Assemble and support pipework	Musculoskeletal strain Cuts from pipe edges Falling pipework Awkward overhead work Dropped tools
Join pipes and fittings	Chemical exposure Solvent vapours Burns from hot joints Press-tool pinch points Joint failure
Conduct hot work	Fire and explosion Gas cylinder release Burns Fume inhalation Ignition of hidden combustibles Flashback
Test gas pipework	Pressurised gas release Explosion or fire Hose whip Incorrect commissioning Asphyxiation from gas accumulation
Test water and drainage	Water release Slip hazards Pipe or plug failure Cross-connection Biological contamination
Clean up and hand over	Sharp waste Residual pressure Chemical spills Trips and falls Unauthorised recommissioning

Need to add specific site requirements?

Use the BlueSafe Portal to tailor this SWMS with site-specific details, job steps, hazards, controls and responsibilities before work starts.

Acceptance Guaranteed: If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.

Legislation & References

The template includes references relevant to the documented work, including:

Applicable Commonwealth, state or territory WHS/OHS legislation and regulations: apply the local jurisdiction's duties for consultation, risk management, construction work, plant, hazardous chemicals, electrical safety, PPE, excavation and confined spaces.
Model Code of Practice: Construction Work (November 2024), as adopted or approved in the relevant jurisdiction; model Codes are guidance unless adopted locally.
Model Code of Practice: Excavation Work, as adopted or approved in the relevant jurisdiction; use competent inspection, atmospheric controls and safe excavation methods where applicable.
Model Code of Practice: Confined Spaces (November 2024), as adopted or approved in the relevant jurisdiction; isolate hazardous services before entry.
Model Code of Practice: Managing Electrical Risks in the Workplace, as adopted or approved in the relevant jurisdiction; isolate unsafe electrical equipment and use suitable inspected equipment.
Model Code of Practice: Hazardous Manual Tasks, as adopted or approved in the relevant jurisdiction.
Guidance standards: NCC Plumbing Code of Australia; AS/NZS 3500 Plumbing and drainage series; AS/NZS 5601 Gas installations series; AS 2865 Confined spaces; AS/NZS 3012 Electrical installations—Construction and demolition sites; AS/NZS 3760 In-service safety inspection and testing of electrical equipment; AS/NZS 1715 and AS/NZS 1716 Respiratory protective equipment; AS/NZS 2210.3 Safety footwear; AS/NZS 1270 Hearing protectors; AS/NZS 1337.1 Eye and face protection; AS/NZS 1801 Occupational protective helmets; AS/NZS 4602.1 High-visibility safety garments.

Standard SWMS Features (Click to Expand)

Task-specific job steps, hazards and control measures
Initial and residual risk ratings
Assigned responsible persons for each job step
Plant, equipment and PPE requirements where applicable
Permits, qualifications and high-risk construction work details where applicable
Worker consultation, sign-off and review sections

Execute Plumbing Tasks SWMS

Included with your purchase