Emergency Lockout Services Drilling and Forced Entry SWMS

Product Overview

This SWMS covers emergency lockout services, including request screening, authority verification, lock bypass, drilling, forced entry and temporary security work. It supports planning for unauthorised access, confrontation, electrical and stored energy, rotating tools, dust, sharp materials and site conditions.

Activities & Specific Tasks Covered

This document includes task-specific risk controls for:

• Accept and screen lockout requests
• Arrive at the location and verify authority to proceed
• Set up and secure the work area
• Inspect tools and assess doors and nearby services
• Use lock-picking, bypass or bump-lock methods where required
• Drill out locks and manage swarf, dust and rotating-tool risks
• Remove padlocks and address stored tension or sharp edges
• Unlock garage doors while managing movement and spring energy
• Conduct controlled entry and install temporary security
• Clean the work area, demobilise and complete sign-off

Who is this for?

Suitable for contractors, workers, supervisors and businesses carrying out emergency lockout, drilling and forced-entry activities.

Specific Job Steps & Hazards Covered

Legislation & References

The template includes references relevant to the documented work, including:

• Applicable Commonwealth, state or territory WHS/OHS legislation and regulations: primary duty of care, worker consultation, information/training/supervision, risk management, plant, electrical safety, hazardous manual tasks, workplace environment, emergency arrangements and incident notification duties, as adopted in the relevant jurisdiction.
• Model Code of Practice: How to Manage Work Health and Safety Risks — guidance on identifying hazards, eliminating or minimising risks, and maintaining and reviewing controls.
• Model Code of Practice: Managing the Risks of Plant in the Workplace — guidance on guarding, plant selection, inspection, maintenance and safe use.
• Model Code of Practice: Managing Electrical Risks in the Workplace — guidance on RCDs, testing, isolation and licensed electrical work.
• Model Code of Practice: Managing the Work Environment and Facilities — guidance on mobile workplaces, remote or isolated work and emergency arrangements.
• Model Code of Practice: Managing Risks of Hazardous Chemicals in the Workplace — guidance on SDS, labelling, storage and exposure controls.
• Model Code of Practice: Managing Psychosocial Hazards at Work — guidance on maintaining and reviewing controls, including consultation.
• Technical guidance: AS/NZS 3760 in-service safety inspection and testing of electrical equipment; AS/NZS 3012 electrical installations for construction and demolition sites where applicable; AS/NZS 1337.1 eye and face protection; AS/NZS 1716 respiratory protective devices; AS/NZS 1270 hearing protectors; AS/NZS 2210.3 safety footwear; AS/NZS 4602.1 high-visibility safety garments; AS/NZS 2161 protective gloves.
• Model WHS laws and model Codes of Practice are guidance material developed for adoption and may not have legal effect unless adopted or otherwise applied in the relevant Commonwealth, state or territory jurisdiction.

---

Standard SWMS Features (Click to Expand)

• Task-specific job steps, hazards and control measures
• Initial and residual risk ratings
• Assigned responsible persons for each job step
• Plant, equipment and PPE requirements where applicable
• Permits, qualifications and high-risk construction work details where applicable
• Worker consultation, sign-off and review sections