BlueSafe

Compressed Air SWMS

This SWMS covers setting up, inspecting, pressurising, operating, maintaining and shutting down compressed-air systems.

Activities covered include

  • Review the task and work area
  • Use compressed air for cleaning
  • Shut down, depressurise and demobilise

Download immediately

Your editable Word and PDF files are ready to download after purchase.

Acceptance guaranteed

If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.

Compressed Air SWMS
  • 100% Compliant with Australian WHS Acts & Regulations
  • Fully Editable MS Word & PDF Formats Included
  • Pre-filled Content - Ready to Deploy Immediately
  • Customisable - Easily Add Your Logo & Site Details
  • Includes 2 Years of Free Compliance Updates

Product Overview

This SWMS covers setting up, inspecting, pressurising, operating, maintaining and shutting down compressed-air systems. It supports work planning and risk management for stored pressure, hose and fitting failures, pneumatic tools, noise, fumes, hot surfaces and emergency releases.

Activities & Specific Tasks Covered

This document includes task-specific risk controls for:

  • Review the task and work area
  • Position the compressor and receiver
  • Inspect the compressor, receiver, hoses and fittings
  • Connect and pressurise the system
  • Operate pneumatic tools
  • Use compressed air for cleaning
  • Manage leaks and blockages
  • Undertake maintenance and repairs
  • Control noise and other exposure risks
  • Respond to an emergency air release
  • Shut down, depressurise and demobilise

Who is this for?

Suitable for contractors, workers, supervisors and businesses using compressed-air systems and pneumatic tools.

Specific Job Steps & Hazards Covered

Job Step / Activity Potential Hazards
Review task and work area
  • Unplanned stored-energy release
  • Unauthorised access
  • Vehicle interaction
  • Poor access and housekeeping
Position compressor and receiver
  • Compressor movement
  • Hot exhaust surfaces
  • Vehicle strike
  • Exhaust fume exposure
  • Noise exposure
Inspect compressor and receiver
  • Receiver rupture
  • Automatic start-up
  • Entanglement in drives
  • Electrical shock
  • Oil or fuel leak
Inspect hoses and fittings
  • Hose whip
  • Coupling separation
  • Air injection injury
  • Trip hazards
  • Flying debris
Connect and pressurise system
  • Sudden pressure release
  • Hose whip
  • Over-pressurisation
  • Unexpected tool operation
  • Noise injury
Operate pneumatic tools
  • Tool ejection
  • Flying particles
  • Hand injury
  • Noise exposure
  • Vibration injury
  • Hose entanglement
Use air for cleaning
  • Air embolism
  • Eye injury
  • Flying contaminants
  • Hearing damage
  • Dust exposure
Manage leaks and blockages
  • Stored-energy release
  • Hose whip
  • Projectile discharge
  • Noise injury
  • Slip from condensate
Undertake maintenance and repairs
  • Unexpected start-up
  • Stored pneumatic energy
  • Entanglement
  • Electrical shock
  • Burns from hot components
Control noise and exposure
  • Noise-induced hearing loss
  • Hand-arm vibration
  • Diesel exhaust
  • Heat stress
  • Fatigue
Respond to emergency release
  • Uncontrolled air release
  • Receiver rupture
  • Hose whip
  • Serious injury
  • Fire from fuel leak
Shut down and depressurise
  • Stored pressure
  • Unexpected restart
  • Hot surfaces
  • Condensate release
  • Trip hazards
Demobilise and sign off
  • Manual handling injury
  • Load shift during transport
  • Residual defects
  • Unauthorised future use

Need to add specific site requirements?

Use the BlueSafe Portal to tailor this SWMS with site-specific details, job steps, hazards, controls and responsibilities before work starts.

Acceptance Guaranteed: If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.

Legislation & References

The template includes references relevant to the documented work, including:

  • Applicable Commonwealth, state or territory WHS/OHS legislation and regulations, including duties to manage risks, provide safe plant, information, training, instruction, supervision, consultation and emergency arrangements.
  • Model Code of Practice: Managing risks of hazardous chemicals in the workplace — compressed air can cause hearing injury, air embolism and receiver rupture; apply the hierarchy of controls.
  • Model Code of Practice: Managing the risks of plant in the workplace — use as guidance for plant guarding, inspection, maintenance, isolation and control of stored energy.
  • Model Code of Practice: Managing noise and preventing hearing loss at work — use as guidance for assessing and controlling compressor and pneumatic-tool noise.
  • Model Code of Practice: Confined spaces — apply where compressed air is used in or near a confined space.
  • AS 1210 Pressure vessels; AS/NZS 3788 Pressure equipment—In-service inspection; AS 4343 Pressure equipment—Hazard levels; AS/NZS 4024.1 Safety of machinery; AS/NZS 1715 Selection, use and maintenance of respiratory protective equipment; AS/NZS 1337.1 Eye and face protection; AS/NZS 1270 Hearing protectors.
  • Industry guidance identifies the need for rated hoses and fittings, hose restraints, isolation of stored energy, regular competent-person inspection, exclusion zones and a strict prohibition on using air hoses to clean people.
Standard SWMS Features (Click to Expand)
  • Task-specific job steps, hazards and control measures
  • Initial and residual risk ratings
  • Assigned responsible persons for each job step
  • Plant, equipment and PPE requirements where applicable
  • Permits, qualifications and high-risk construction work details where applicable
  • Worker consultation, sign-off and review sections

Suitable for Industries

General

$44.95

One-time payment