BlueSafe

Car Carrier SWMS

This SWMS covers planning car carrier transport, preparing loading areas, loading and restraining vehicles, transport, unloading and close-out checks.

Activities covered include

  • Plan the transport task and load allocation
  • Load vehicles onto ground decks
  • Stow ramps and equipment, then complete close-out checks

Download immediately

Your editable Word and PDF files are ready to download after purchase.

Acceptance guaranteed

If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.

Car Carrier SWMS
  • 100% Compliant with Australian WHS Acts & Regulations
  • Fully Editable MS Word & PDF Formats Included
  • Pre-filled Content - Ready to Deploy Immediately
  • Customisable - Easily Add Your Logo & Site Details
  • Includes 2 Years of Free Compliance Updates

Product Overview

This SWMS covers planning car carrier transport, preparing loading areas, loading and restraining vehicles, transport, unloading and close-out checks. It supports planning and managing risks from vehicle movement, ramps and decks, load restraint, falls, crush points and traffic interactions.

Activities & Specific Tasks Covered

This document includes task-specific risk controls for:

  • Plan the transport task and load allocation
  • Establish a controlled loading area
  • Position and secure the carrier
  • Inspect carrier equipment and restraints
  • Deploy ramps and decks
  • Load vehicles onto ground decks
  • Load vehicles onto upper decks
  • Restrain vehicles and complete departure checks
  • Release restraints and unload vehicles
  • Stow ramps and equipment, then complete close-out checks

Who is this for?

For contractors, workers, supervisors and businesses carrying out car carrier transport activities.

Specific Job Steps & Hazards Covered

Job Step / Activity Potential Hazards
Plan transport task
  • Incorrect load allocation
  • Overloaded carrier
  • Fatigue-related error
  • Unfamiliar site conditions
Establish loading area
  • Pedestrian strike
  • Vehicle collision
  • Unauthorised entry
  • Poor visibility
Position and secure carrier
  • Carrier roll-away
  • Carrier instability
  • Crush from moving decks
  • Ground collapse
Inspect carrier equipment
  • Hydraulic failure
  • Ramp collapse
  • Winch failure
  • Defective restraints
Deploy ramps and decks
  • Fall from height
  • Crush at pinch points
  • Ramp movement
  • Hydraulic hose failure
Load ground-deck vehicles
  • Vehicle run-away
  • Collision with carrier
  • Ramp departure
  • Exhaust exposure
Load upper-deck vehicles
  • Fall from elevated deck
  • Vehicle fall from deck
  • Crush between vehicles
  • Carrier instability
  • Ramp departure
Restrain loaded vehicles
  • Vehicle shift in transit
  • Crush from vehicle movement
  • Manual handling strain
  • Fall from deck
  • Stored-energy release
Conduct departure checks
  • Load loss on road
  • Overheight strike
  • Unsecured equipment
  • Driver fatigue
Release vehicle restraints
  • Vehicle roll-away
  • Stored-energy release
  • Fall from deck
  • Struck by restraint
Unload carrier vehicles
  • Vehicle fall from ramp
  • Pedestrian strike
  • Collision during reversing
  • Fall from elevated deck
  • Vehicle run-away
Stow ramps and equipment
  • Crush from hydraulic movement
  • Pinch points
  • Falling equipment
  • Manual handling strain
Complete close-out checks
  • Slips and trips
  • Fluid spill
  • Unreported defects
  • Unauthorised vehicle movement

Need to add specific site requirements?

Use the BlueSafe Portal to tailor this SWMS with site-specific details, job steps, hazards, controls and responsibilities before work starts.

Acceptance Guaranteed: If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.

Legislation & References

The template includes references relevant to the documented work, including:

  • Applicable Commonwealth, state or territory WHS/OHS legislation and regulations, including duties to identify hazards, manage risks using the hierarchy of controls, provide safe plant and systems of work, consult workers, maintain controls and provide information, training, instruction and supervision.
  • Model Code of Practice: How to manage work health and safety risks.
  • Model Code of Practice: Managing risks of plant in the workplace.
  • Model Code of Practice: Managing the risk of falls at workplaces.
  • Model Code of Practice: Hazardous manual tasks.
  • Model Code of Practice: Managing the work environment and facilities.
  • Model Code of Practice: Managing psychosocial hazards at work.
  • Model Code of Practice: Managing risks in stevedoring, as relevant guidance for vehicle movement, traffic separation, exclusion zones and loading/unloading systems.
  • National Transport Commission Load Restraint Guide, current edition.
  • AS/NZS 1891 series Industrial fall-arrest systems and devices.
  • AS/NZS 2210.3 Personal protective equipment—Safety footwear.
  • AS/NZS 4602.1 High-visibility safety garments.
  • AS/NZS 1337.1 Personal eye-protection.
  • AS/NZS 1715 and AS/NZS 1716 Selection, use and maintenance of respiratory protective equipment.
  • AS 1742.3 Manual of uniform traffic control devices—Traffic control for works on roads.

Standard SWMS Features (Click to Expand)
  • Task-specific job steps, hazards and control measures
  • Initial and residual risk ratings
  • Assigned responsible persons for each job step
  • Plant, equipment and PPE requirements where applicable
  • Permits, qualifications and high-risk construction work details where applicable
  • Worker consultation, sign-off and review sections

Suitable for Industries

Transport and LogisticsWarehousing and DistributionAutomotive and Mechanical

Related templates

$79.50

One-time payment