Cabinet Installation Wardrobes and Kitchen Fit-Out SWMS

Product Overview

This SWMS covers cabinet installation, wardrobes and kitchen fit-out activities from scope review and work-area setup through installation, service connections, inspection and handover. It supports planning work controls and managing hazards from materials, tools, services, dust, falling items and manual handling.

Activities & Specific Tasks Covered

This document includes task-specific risk controls for:

• Review the scope, site conditions and work requirements
• Set up and control the work area
• Unload, stack and handle cabinets and panels
• Inspect tools and equipment
• Locate services and set out fixing locations
• Cut and modify joinery
• Install cabinet carcasses
• Install wardrobes and storage units
• Install safety backing
• Fit doors, window joinery, hinges and hardware
• Connect appliances and services where authorised
• Inspect the installation and hand over the area

Who is this for?

For contractors, workers, supervisors and businesses carrying out cabinet installation, wardrobe installation or kitchen fit-out activities.

Specific Job Steps & Hazards Covered

Legislation & References

The template includes references relevant to the documented work, including:

• Applicable Commonwealth, state or territory WHS/OHS legislation and regulations, including duties to identify hazards, eliminate or minimise risks so far as reasonably practicable, consult workers, provide information, training, instruction and supervision, and maintain safe plant, systems of work and workplaces.
• Model Code of Practice: Construction Work — guidance for construction work, SWMS preparation and coordination of construction activities; model Codes require adoption or approval in the relevant jurisdiction before they have legal effect.
• Model Code of Practice: How to Manage Work Health and Safety Risks — apply the hierarchy of controls, monitor controls and review them when conditions change.
• Model Code of Practice: Hazardous Manual Tasks — use task design and mechanical aids ahead of administrative controls for handling cabinets and panels.
• Model Code of Practice: Managing Electrical Risks in the Workplace — isolate electrical installations where practicable, prevent reconnection, use RCD protection and restrict fixed electrical work to authorised electrical workers.
• Model Code of Practice: Managing the Risks of Falls at Workplaces — assess access equipment and prevent falls when installing overhead cabinetry, wardrobe top tracks or high-level fittings.
• Model Code of Practice: Managing Noise and Preventing Hearing Loss at Work — control noise from drills, saws and extraction equipment.
• Model Code of Practice: Managing Risks of Respirable Crystalline Silica in the Workplace — avoid uncontrolled cutting, drilling or grinding of silica-containing products; dry sweeping and compressed-air cleaning can re-suspend hazardous dust.
• AS/NZS 3000 Electrical Installations (Wiring Rules); AS/NZS 3012 Electrical Installations—Construction and Demolition Sites; AS/NZS 3760 In-service Safety Inspection and Testing of Electrical Equipment.
• AS/NZS 1892 Portable Ladders; AS 1657 Fixed Platforms, Walkways, Stairways and Ladders; AS/NZS 4576 Guidelines for Scaffolding; AS/NZS 5532 Manufacturing Requirements for Single-Point Anchor Device Used for Harness-Based Work at Heights.
• AS/NZS 1715 Selection, Use and Maintenance of Respiratory Protective Equipment; AS/NZS 1716 Respiratory Protective Devices; AS/NZS 1337.1 Personal Eye-Protection; AS/NZS 1270 Hearing Protectors; AS/NZS 2210.3 Safety Footwear.

---

Standard SWMS Features (Click to Expand)

• Task-specific job steps, hazards and control measures
• Initial and residual risk ratings
• Assigned responsible persons for each job step
• Plant, equipment and PPE requirements where applicable
• Permits, qualifications and high-risk construction work details where applicable
• Worker consultation, sign-off and review sections