Boat Building Maintenance and Repair SWMS
This SWMS covers boat building maintenance and repair activities, including vessel positioning, cleaning, coating, component work, servicing and sign-off.
Activities covered include
- Set up the site and isolate the work area
- Install engines, shafts, rudders and steering components
- Clean up, manage residual hazards and sign off
Download immediately
Your editable Word and PDF files are ready to download after purchase.
Acceptance guaranteed
If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.
- 100% Compliant with Australian WHS Acts & Regulations
- Fully Editable MS Word & PDF Formats Included
- Pre-filled Content - Ready to Deploy Immediately
- Customisable - Easily Add Your Logo & Site Details
- Includes 2 Years of Free Compliance Updates
Product Overview
This SWMS covers boat building maintenance and repair activities, including vessel positioning, cleaning, coating, component work, servicing and sign-off. It supports planning, hazard identification and risk management for vessel movement, water, dust, chemicals, lifting, energy and enclosed areas.
Activities & Specific Tasks Covered
This document includes task-specific risk controls for:
- Set up the site and isolate the work area
- Position plant and secure the vessel
- Pressure clean the hull
- Apply anti-foul coating
- Complete deck widening and vessel component removal
- Install engines, shafts, rudders and steering components
- Install bilge pumps and navigation electronics
- Lower, install and maintain masts and rigging
- Maintain engine rooms and rescue boats
- Service refrigeration systems
- Clean up, manage residual hazards and sign off
Who is this for?
Suitable for contractors, workers, supervisors and businesses carrying out boat building maintenance and repair activities.
Specific Job Steps & Hazards Covered
| Job Step / Activity | Potential Hazards |
|---|---|
| Site setup and isolation |
|
| Position plant and vessel |
|
| Pressure clean hull |
|
| Apply anti-foul coating |
|
| Deck widening operation |
|
| Demolish vessel components |
|
| Install engines and shafts |
|
| Fit rudders and steering |
|
| Install bilge pump |
|
| Install navigation electronics |
|
| Lower masts |
|
| Install mast and rigging |
|
| Maintain engine room |
|
| Maintain rescue boats |
|
| Service refrigeration system |
|
| Clean up and sign off |
|
Need to add specific site requirements?
Use the BlueSafe Portal to tailor this SWMS with site-specific details, job steps, hazards, controls and responsibilities before work starts.
Acceptance Guaranteed: If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.
Legislation & References
The template includes references relevant to the documented work, including:
- Applicable Commonwealth, state or territory WHS/OHS legislation and regulations.
- Applicable marine safety, port, harbour-master, environmental protection, dangerous-goods and electrical-safety requirements for the work location.
- Model Code of Practice: How to Manage Work Health and Safety Risks.
- Model Code of Practice: Construction Work.
- Model Code of Practice: Managing the Risks of Plant in the Workplace.
- Model Code of Practice: Managing the Risk of Falls at Workplaces.
- Model Code of Practice: Managing Risks of Hazardous Chemicals in the Workplace.
- Model Code of Practice: Spray Painting and Powder Coating.
- Model Code of Practice: Confined Spaces.
- Model Code of Practice: Managing Electrical Risks in the Workplace.
- Model Code of Practice: Hazardous Manual Tasks.
- Model Code of Practice: Managing Noise and Preventing Hearing Loss at Work.
- Model Code of Practice: How to Safely Remove Asbestos.
- Guidance standards: AS/NZS 1715 and AS/NZS 1716 respiratory protection; AS/NZS 1337.1 eye protection; AS/NZS 1270 hearing protectors; AS 2210.3 safety footwear; AS/NZS 1891 fall-arrest systems; AS/NZS 5532 anchor devices; AS/NZS 1576 scaffolding; AS 2550 safe use of cranes; AS 1418 crane design; AS/NZS 3760 electrical equipment inspection and testing; AS/NZS 3000 electrical installations; AS/NZS 1020 static electricity; AS/NZS 4024 machinery safety; AS 2865 confined spaces; AS 1319 safety signs.
Standard SWMS Features (Click to Expand)
- Task-specific job steps, hazards and control measures
- Initial and residual risk ratings
- Assigned responsible persons for each job step
- Plant, equipment and PPE requirements where applicable
- Permits, qualifications and high-risk construction work details where applicable
- Worker consultation, sign-off and review sections
Suitable for Industries
Related templates
$79.50
$96.80
Includes all formats + 2 years updates
Acceptance guaranteed
If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.
$79.50
$96.80
One-time payment