Name: Air Drill SWMS
Brand: BlueSafe Online
SKU: prod_01M283K2G8BMBQNYKMYRC23G1Q
Price: 96.80 AUD
Availability: InStock

Product Overview

This SWMS covers planning, setting up and using an air drill for holes and penetrations, including equipment checks, dust control and clean-up. It supports work planning and risk management for drilling activities, compressed air, services, access and site conditions.

Activities & Specific Tasks Covered

This document includes task-specific risk controls for:

Review the work scope, area, access and emergency arrangements
Check substrates and identify services before drilling
Position the compressor and manage hoses
Inspect the air drill, hoses and compressed-air system
Set up a stable drilling position with suitable visibility
Control drilling dust, debris and slurry
Drill holes and penetrations
Manage drilling noise and vibration
Change drill bits and clear jams
Respond to equipment faults or incidents
Clean the work area and demobilise equipment

Who is this for?

For contractors, workers, supervisors and businesses carrying out air-drilling activities.

Specific Job Steps & Hazards Covered

Job Step / Activity	Potential Hazards
Review scope and work area	Unplanned drilling location Unauthorised access Poor work coordination Slips and trips Inadequate emergency response
Check substrate and services	Electrical service strike Gas release Water release Structural damage Asbestos exposure
Position compressor and hoses	Compressor movement Vehicle strike Noise exposure Exhaust fume exposure Hose trip hazard Fire from fuel
Inspect drill and air system	Hose whip High-pressure air injection Tool malfunction Flying components Compressed-air release Electric shock from auxiliaries
Set up drilling position	Awkward posture Drill kickback Fall from access equipment Dropped tools Poor visibility Hand injury
Control dust and debris	Respirable silica dust Flying drill swarf Eye injury Dust migration Slip from slurry Respiratory irritation
Drill holes and penetrations	Rotating drill bit Kickback Flying fragments Drill breakthrough Noise exposure Hand-arm vibration Unexpected service strike
Manage noise and vibration	Noise-induced hearing loss Hand-arm vibration syndrome Fatigue Reduced communication Musculoskeletal strain
Change bits and clear jams	Unexpected start-up Stored air pressure Cuts from drill bit Flying fragments Hand injury
Respond to faults and incidents	Hose rupture Service damage Air injection injury Fire Dust release Uncontrolled plant
Clean work area	Residual dust Sharp swarf Trips from hoses Manual handling strain Waste contamination
Demobilise and sign off	Stored pressure Plant damage during transport Unauthorised reuse Incomplete work records Residual site hazards

Need to add specific site requirements?

Use the BlueSafe Portal to tailor this SWMS with site-specific details, job steps, hazards, controls and responsibilities before work starts.

Acceptance Guaranteed: If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.

Legislation & References

The template includes references relevant to the documented work, including:

Applicable Commonwealth, state or territory WHS/OHS legislation and regulations.
Model Code of Practice: How to Manage Work Health and Safety Risks.
Model Code of Practice: Managing the Risks of Plant in the Workplace.
Model Code of Practice: Managing Noise and Preventing Hearing Loss at Work.
Model Code of Practice: Hazardous Manual Tasks.
Model Code of Practice: Managing the Work Environment and Facilities.
Model Code of Practice: Managing the Risks of Falls at Workplaces, where work is undertaken at height.
Model Code of Practice: How to Manage and Control Asbestos in the Workplace, where asbestos may be present.
AS/NZS 1210 Pressure vessels; AS/NZS 3788 Pressure equipment—In-service inspection; AS/NZS 4024 series Safety of machinery; AS/NZS 1337.1 Eye and face protection; AS/NZS 1270 Hearing protectors; AS/NZS 1715 and AS/NZS 1716 Respiratory protective equipment; AS/NZS 2161.1 Occupational protective gloves; AS/NZS 2210.3 Safety footwear; AS/NZS 3012 Electrical installations—Construction and demolition sites where electrical equipment is used.

Standard SWMS Features (Click to Expand)

Task-specific job steps, hazards and control measures
Initial and residual risk ratings
Assigned responsible persons for each job step
Plant, equipment and PPE requirements where applicable
Permits, qualifications and high-risk construction work details where applicable
Worker consultation, sign-off and review sections

Air Drill SWMS

Included with your purchase