Name: Joinery And Cabinet Making SWMS
Brand: BlueSafe Online
SKU: prod_01KBPKJ5QF4WCVHA30Z04C70Y6
Price: 64.95 AUD
Availability: InStock

Product Overview

This SWMS covers joinery and cabinet making from planning and material handling through cutting, machining, finishing, assembly, transport, installation and handover. It supports planning by addressing plant, dust, manual handling, sharp-edge, chemical, fire and installation risks.

Activities & Specific Tasks Covered

This document includes task-specific risk controls for:

Review the scope and plan the work
Set up the work area
Inspect plant and extraction
Receive and store materials
Cut panels and timber
Machine edges and holes
Sand and prepare surfaces
Apply adhesives and finishes
Assemble cabinets and hardware
Transport cabinets to site
Install and secure cabinetry
Adjust, clean, demobilise and sign off

Who is this for?

For contractors, workers, supervisors and businesses carrying out joinery and cabinet making activities.

Specific Job Steps & Hazards Covered

Job Step / Activity	Potential Hazards
Review scope and plan work	Incorrect dimensions Unidentified site hazards Conflicting trades Unplanned plant use Manual handling strain
Set up work area	Unauthorised entry Slips and trips Dust migration Electrical lead damage Fire from combustibles
Inspect plant and extraction	Contact with moving parts Blade or cutter failure Electric shock Dust exposure Unexpected start-up Excessive noise
Receive and store materials	Crush from sheet goods Forklift interaction Musculoskeletal injury Falling stored materials Splinters and sharp edges
Cut panels and timber	Saw contact Kickback Ejected offcuts Wood dust inhalation Noise exposure Eye injury
Machine edges and holes	Entanglement Cutter contact Workpiece ejection Flying fragments Dust and noise Pinch points
Sand and prepare surfaces	Respirable wood dust Hand-arm vibration Noise exposure Eye irritation Fire from dust accumulation Repetitive strain
Apply adhesives and finishes	Flammable vapours Chemical skin contact Respiratory sensitisation Fire or explosion Spills Hazardous waste
Assemble cabinets and hardware	Pinch points Staple or nail ejection Manual handling strain Cuts from sharp edges Adhesive exposure Unstable cabinet units
Transport cabinets to site	Load shift Vehicle strike Crush during unloading Forklift collision Traffic interaction Damage to finished units
Install and secure cabinetry	Cabinet collapse Hidden services strike Power-tool injury Manual handling strain Falling objects Exposure to occupied areas
Adjust, test and hand over	Pinch from moving hardware Sharp edges Electrical contact Customer injury Unfinished defects
Clean, demobilise and sign off	Residual dust Fire from waste rags Slips and trips Cuts from waste Plant damage during pack-up

Need to add specific site requirements?

Use the BlueSafe Portal to tailor this SWMS with site-specific details, job steps, hazards, controls and responsibilities before work starts.

Acceptance Guaranteed: If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.

Legislation & References

The template includes references relevant to the documented work, including:

Applicable Commonwealth, state or territory WHS/OHS legislation and regulations.
Model Code of Practice: How to Manage Work Health and Safety Risks.
Model Code of Practice: Managing the Risks of Plant in the Workplace, including inspection, maintenance, guarding, isolation and competent operation.
Model Code of Practice: Managing Risks of Hazardous Chemicals in the Workplace, noting woodworking and cabinet making may involve fine wood dust, combustible dust and flammable solvents from glues, thinners, oils, waxes and shellac.
Model Code of Practice: Managing Noise and Preventing Hearing Loss at Work; manage exposure below the 85 dB(A) LAeq,8h and 140 dB(C) peak exposure standards where applicable.
Model Code of Practice: Hazardous Manual Tasks.
Model Code of Practice: Managing Electrical Risks in the Workplace.
Model Code of Practice: Construction Work, where joinery installation is construction work.
AS 4024.1 series Safety of machinery.
AS/NZS 1269.1 Occupational noise management—Measurement and assessment of noise immission and exposure.
AS/NZS 1270 Acoustics—Hearing protectors.
AS/NZS 1337.1 Personal eye-protection—Eye and face protectors for occupational applications.
AS/NZS 1715 Selection, use and maintenance of respiratory protective equipment; AS/NZS 1716 Respiratory protective devices.
AS/NZS 2210.3 Personal protective equipment—Safety footwear.
AS/NZS 3000 Electrical installations (Wiring Rules).
AS 1940 The storage and handling of flammable and combustible liquids.

Standard SWMS Features (Click to Expand)

Task-specific job steps, hazards and control measures
Initial and residual risk ratings
Assigned responsible persons for each job step
Plant, equipment and PPE requirements where applicable
Permits, qualifications and high-risk construction work details where applicable
Worker consultation, sign-off and review sections

Joinery And Cabinet Making SWMS

Activities covered include

Free company branding

2 years of free updates

Acceptance guaranteed