Demolition Saw SWMS

This SWMS covers demolition saw planning, setup, cutting, dust control, cleanup and inspection.
Activities covered include
- Review the scope, structure and work plan
- Control dust, slurry and work-area visibility
- Stop, clean, maintain and inspect the work area
- Compliant with Australian WHS Acts & Regulations
- Fully Editable MS Word & PDF Formats Included
- Pre-filled Content - Ready to Deploy Immediately
Free company branding
Your logo, ABN and business details added at no extra cost.
2 years of free updates
Compliance updates included for two years, with updated documents available in your portal.
Acceptance guaranteed
Free revisions to meet your client or principal's review requirements, with resubmission support until accepted.
Product Overview
This SWMS covers demolition saw planning, setup, cutting, dust control, cleanup and inspection. It supports management of service, blade, dust, noise, fuel, power and debris-related risks.
Activities & Specific Tasks Covered
This document includes task-specific risk controls for:
- Review the scope, structure and work plan
- Establish the work zone and isolate services
- Inspect the saw, blade, fuel and power arrangements
- Set the material and cutting line
- Control dust, slurry and work-area visibility
- Start, warm and operate the saw for controlled cutting
- Manage offcuts, debris and sharp edges
- Stop, clean, maintain and inspect the work area
Who is this for?
For contractors, workers, supervisors and businesses carrying out demolition saw activities.
Specific Job Steps & Hazards Covered
| Job Step / Activity | Potential Hazards |
|---|---|
| Review scope and plan work |
|
| Establish work zone |
|
| Isolate services and hazards |
|
| Inspect saw and blade |
|
| Prepare fuel and power |
|
| Set material and cutting line |
|
| Control dust and slurry |
|
| Start and warm saw |
|
| Perform controlled cutting |
|
| Manage offcuts and debris |
|
| Stop, clean and maintain |
|
| Inspect and sign off |
|
Need to add specific site requirements?
Use the BlueSafe Portal to tailor this SWMS with site-specific details, job steps, hazards, controls and responsibilities before work starts.
Acceptance Guaranteed: If your client or principal requests changes during document review, BlueSafe will help revise the document at no extra cost and support resubmission until it is accepted.
Legislation & References
The template includes references relevant to the documented work, including:
- Applicable Commonwealth, state or territory WHS/OHS legislation and regulations: apply the local duties for consultation, risk management, plant, construction work, hazardous chemicals, airborne contaminants, noise, PPE, electrical safety and asbestos. Confirm jurisdiction-specific requirements with the relevant regulator before work starts.
- Model Code of Practice: Demolition Work — guidance for demolition contractors and persons managing demolition workplaces; it was developed for adoption and is not automatically law in every jurisdiction.
- Model Code of Practice: Construction Work — guidance on construction work, SWMS and associated hazards; it was developed for adoption and is not automatically law in every jurisdiction.
- Model Code of Practice: How to Manage Work Health and Safety Risks — use to identify hazards, assess risks where needed, implement controls and review their effectiveness.
- Model Code of Practice: Managing Risks of Respirable Crystalline Silica in the Workplace — apply where cutting concrete, masonry, engineered stone or other crystalline silica substances; model-code status and local adoption must be checked.
- Model Code of Practice: Managing Noise and Preventing Hearing Loss at Work.
- Model Code of Practice: Managing Electrical Risks in the Workplace — construction and demolition electrical installations may also be addressed by AS/NZS 3012.
- Technical guidance: AS/NZS 3012 Electrical installations—Construction and demolition sites; AS/NZS 1715 and AS/NZS 1716 respiratory protective equipment; AS/NZS 1270 hearing protectors; AS/NZS 1337.1 eye and face protection; AS/NZS 2210.3 safety footwear; AS/NZS 1801 industrial safety helmets; AS/NZS 4602.1 high-visibility safety garments; AS 1788.1 Abrasive wheels; and the demolition-saw and blade manufacturer instructions.
Standard SWMS Features (Click to Expand)
- Task-specific job steps, hazards and control measures
- Initial and residual risk ratings
- Assigned responsible persons for each job step
- Plant, equipment and PPE requirements where applicable
- Permits, qualifications and high-risk construction work details where applicable
- Worker consultation, sign-off and review sections
Suitable for Industries
Related templates
$79.50
$96.80
Includes free branding + 2 years of free updates
$79.50
$96.80
Free branding + 2 years of updates